Power Acoustik - BAMF Class D Series 3000W Class D Digital Mono Amplifier - Black
Model: BAMF1-3000D
SKU: 5141311
This item is no longer available in new condition. See similar items below
- Key Specs
- Continuous Watts x Channel @ Ohms: 700 W x 1 x 4 Ohms; 1000 W x 1 x 2 Ohms; 1500 W x 1 x 1 Ohms
- Maximum Watts x Channel @ Ohms: 1000 W x 1 X 2 (This is the maximum load the speaker, subwoofer or amp can drive.)
- Amplifier Class: D (An amplifier's mode of operation, specifically the conditions in which its electrical current flows for the duration of an audio signal, determines its class. Each class has its strengths and weaknesses when it comes to power efficiency, levels of crossover distortion, and overall sound quality.)
- Number Of Channels: 1
- Bass Boost: None (Circuitry that boosts the bass response of the amplifier, improving audio reproduction enhancing the sound of low frequencies. Fixed boost means the level of bass response is preset, whereas variable boost allows the user to make adjustments.)
- Bridgeable: true (Bridging an amplifier increases the power it supplies to the speaker(s).)
- Speaker-Level Inputs: true (Also referred to as high-level inputs. Enables the amplifier to receive a sound signal from another device that does not have RCA, or low-level, inputs.)
- General
- Brand: Power Acoustik
- Model Number: BAMF1-3000D
- Product Name: BAMF Class D Series 3000W Class D Digital Mono Amplifier
- Color: Black
- Mounting Hardware Included: true
- Audio Power
- Continuous Watts x Channel @ Ohms: 700 W x 1 x 4 Ohms; 1000 W x 1 x 2 Ohms; 1500 W x 1 x 1 Ohms
- Total Power Handling RMS: 1500 watts
- Watts Per Channel RMS: 1000 watts
- Maximum Watts x Channel @ Ohms: 1000 W x 1 X 2 (This is the maximum load the speaker, subwoofer or amp can drive.)
- Total Power Handling Maximum: 3000 watts
- Watts Per Channel Maximum: 3000 watts
- Amplifier Class: D (An amplifier's mode of operation, specifically the conditions in which its electrical current flows for the duration of an audio signal, determines its class. Each class has its strengths and weaknesses when it comes to power efficiency, levels of crossover distortion, and overall sound quality.)
- Audio
- Number Of Channels: 1
- Minimum Frequency Response: 20 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 0.2 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Total Harmonic Distortion: 0.00020 percent (Measurement of the harmonic sound distortion. The lower the percentage, the cleaner the sound.)
- Signal-to-Noise Ratio (SNR): 0 decibels (The ratio of the desired signal's strength to the level of background noise. A ratio higher than 1:1, which equates to greater than 0 decibels, indicates more signal than noise.)
- Bass Boost: None (Circuitry that boosts the bass response of the amplifier, improving audio reproduction enhancing the sound of low frequencies. Fixed boost means the level of bass response is preset, whereas variable boost allows the user to make adjustments.)
- Features
- Bridgeable: true (Bridging an amplifier increases the power it supplies to the speaker(s).)
- MOSFET Power Supply: true (A specific type of power supply with the advantages of high switching speed and efficiency at low voltages.)
- Bluetooth Enabled: false (The device is capable of communicating with another device via Bluetooth, provided they are within the required range of each other. A Bluetooth-enabled device must also be the same Bluetooth version or higher than the accessory it is intended to pair with.)
- Remote Control Included: No
- Marine: false
- Fan Cooled: false
- Input
- Line-Level Inputs: true (Also referred to as low-level inputs. Enables the amplifier to receive a sound signal from another device via RCA cables.)
- Speaker-Level Inputs: true (Also referred to as high-level inputs. Enables the amplifier to receive a sound signal from another device that does not have RCA, or low-level, inputs.)
- Output
- Preamp Outputs: false
- Dimensions
- Product Height: 2.3 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 8.5 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 11.3 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 0.1 pounds (The out of box weight of the item.)
- Warranty
- Warranty - Parts: 90 days
- Warranty - Labor: 90 days
- Compatibility
- Voice Assistant Built-in: No (A digital assistant built into the device that uses voice commands to answer questions and control smart devices.)
- Other
- UPC: 709483052734
Enjoy enhanced low-octave harmonics and dynamics with the 12dB bass boost of this Power Acoustik Monoblock Class D Amplifier. The amp is protected by direct short, thermal and overload circuits to provide years of performance. Made with a die-cast aluminum alloy heat sink, the Power Acoustik Monoblock Class D amplifier provides optimum dissipation.
- Handles up to 700W RMS (continuous) @ 4 Ohms or 1000W RMS @ 2 Ohms:
For powerful sound. - 4 ohms impedance:
Conducts power evenly to keep the speaker at an appropriate level. - Bass boost:
Delivers pounding audio. - 1-channel output:
Allows easy system expansion. - Class D circuitry:
Ensures reliable power handling.
Whats Included
- Power Acoustik BAMF Class D Series BAMF1-3000D
- Cable remote control
Q: Will this amp support two 12in Power Acoustik Gothic ran in parallel for all four voice coils
A: Hello "T", The minimum impedance of the BAMF Series Mono block Amplifier is 1 Ohm. The Gothic GW3-12 Sub-Woofer's voice coils are 2 Ohms each, in which case all four voice coils in "Parallel" will be a 0.5 Ohm load to the amplifier. Which is not stable for the amp. You can wire each Sub-Woofer in "Series" in order to create two 4 Ohm Sub-Woofers, then "Parallel" them to a stable 2 Ohm load to the amplifier, but the BAMF1-3000D will only deliver 1,000 Watts RMS into a 2 Ohm load. Since each Gothic GW3-12 needs 1,200 Watts RMS, with two Sub's in the system you need an amplifier that will deliver 2,400 Watts RMS @ 2 Ohms. In this case, I would recommend going with the BAMF1-8000D that will deliver 2,700 Wats RMS @ 2 Ohms. This will be a surplus of 150 Watts RMS per Sub-Woofer, but its far better to give more power to the Sub-Woofers, than not enough.
