Powerbass - ASA3-1000.1D - 1000 Watt x 1 @ 1-Ohm Amplifier - Black/Gray

PowerBass ACS-1000D 1ch Compact Amplifier PowerBass is pleased to introduce their newest series of Class A/B full range and Class D bass amplifiers. Borrowing from their classic ASA series, these new amplifiers offer the most desired features in the most compact chassis allowable. To accomplish this they selected SMD parts and engineered a brand new 6 oz/kg high density heat sink engineered for maximum efficiency and cooling. The result a line-up of two, four and mono channel models that offer great performance and fantastic value. Ultra efficient, the ACS amplifiers produce plenty of low distortion high fidelity audio in a footprint small enough to fit nicely in nearly any vehicle. If you are seeking the perfect mix of performance and value look no further. Features - • 1,000 Watt High Efficiency Class D Design • 1-OHM Stable Mono Block Amplifier • MOSFET Power Supply • High Level (Speaker)/Low Level (RCA) Input • Remote Soft Delay Turn On/Off Circuit • Variable Low Pass Electronic Crossover • Selectable 12dB Bass Boost EQ • Variable Gain Control • Remote Level Control Port (for optional PB-GAIN1 controller) • Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output. Specifications - • Variable Subsonic Freq: Variable 15 Hz - 50 Hz • Inputs: RCA, 1 Pair Input, 1 Pair Speaker Level Input • Equalization Boost/Cut: Switchable 0/12 dB @ 45Hz • Power Supply: Unregulated PWM • Switchable Subwoofer EQ: 0 / +12 dB @ 45 Hz • Subwoofer EQ Frequency: 45 Hz • Variable Subwoofer EQ: Switchable 0/+12 dB • Low-Pass Crossover Freq: Variable 30 Hz - 250 Hz • Peak Power: 2000 watts • Crossover Slope: 12 dB • Dimensions (in Inches): 12.0" x 7.1" x 2.0" • Input Sensitivity: 0.25 V - 6.0 V • S/N Ratio: >90 dB • Total Harmonic Distortion: 0.5% @ 1,000 watts • Output Power (14.4 V) @ 4 ohm: 400 watts x 1 • Output Power (14.4 V) @ 2 ohm: 600 watts x 1 • Output Power (14.4 V) @ 1 ohm: 1000 watts x 1 • Frequency Response: 10 Hz - 250 Hz

PowerBass ASA3-1500.1D 1,500w rms @ 1 - Ohm mono block class-d amplifier To give your subwoofers some serious power at an affordable price, we offer the ASA3 range in super efficient Class D power. This line offers amplifiers that can provide up to 1,500 watts to a single woofer. PowerBass's ASA3 Class D amplifiers are always 1-ohm stable, and still come complete with all our sought after features like subsonic filters to keep ultra low frequencies from zapping power from frequencies that you do not want to reproduce and protection circuitry that will keep your amplifier from blowing up during duress. Features - • 1,500 Watt High Efficiency Class D Design • 1-OHM Stable Mono Block Amplifier • Double Sided Circuit Board Construction • Low Level RCA Input/Low Level RCA Pass Through Output • Remote Soft Delay Turn On/Off Circuit • Variable Low Pass Electronic Crossover • Variable 12dB Bass Boost EQ • Variable Gain Control • Wired Secondary Remote Gain Control Included • Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output. • Strapable Dual Amp Power Doubling Circuit (Amp-to-Amp Bridged at 2 ohm minimum) Specifications - • Selectable Subwoofer EQ: 0-18 dB Gain @ 45Hz • Variable Subsonic Freq: 15 Hz - 50 Hz • Equalization Boost/Cut: 0 - 18 dB • Subwoofer Frequency Range: 20 Hz - 150 Hz • 4-ohm Power: 500 watts x 1 • 1-ohm Mono Power: 1500 watts x 1 • 2-ohm Power: 1000 watts x 1 • Subwoofer EQ Frequency: 45 Hz • Variable Subwoofer EQ: 0 - 18 dB • Low-Pass Crossover Freq: 50 Hz -150 Hz • Peak Power: 3000 watts • Crossover Slope: 12 dB • Dimensions (in Inches): 16.6" x 9.4" x 2.3" • Input Sensitivity: 0.25 V - 6.0 V • S/N Ratio: >80 dB • Total Harmonic Distortion: 0.5% at Rated Power • Strapped Output Power @ 2ohms: 3000 watts x 1 • Output Power (14.4 V) @ 4 ohm: 1000 watts x 1 • Output Power (14.4 V) @ 2 ohm: 1000 watts x 1 • Output Power (14.4 V) @ 1 ohm: 1500 watts x 1 • Frequency Response: 20 Hz - 250 Hz

PowerBass XMA-800D 800 Watt Mono Block Compact Amplifier The XMA amplifiers carry on the tradition of looking good and sounding great while taking up less space than any other amplifier we have ever offered – and smaller than most amps available from the majority of our competitors’ at the same output levels. High efficiency FRD (Full Range Digital) technology allows these amplifiers to operate at well over 85% efficiency. Limited space no longer means sacrificing great sound with the new PowerBass XMA Amplifiers. Features - • 1,600 Watt High Efficiency Full-Range Class D Design • 2-OHM Stable Five Channel Amplifier • Ultra Low Current Draw • Double Sided Copper Plated PCB • PWM MOSFET Power Supply • Digital Sound Optimization Circuitry • High Damping Control Circuit • Variable Subsonic Filter • High Current Voltage Ripple Rejection Circuitry • Balanced RCA Inputs • Auto Turn On/Off • Remote Soft Delay Turn On/Off Circuit • 40 Click Variable Detente High/Low Pass Electronic Crossover • 40 Click Variable Detente Bass Boost @ 45 Hz • Variable Gain Control • Wired Secondary Remote Gain Control Included Specifications - • Selectable Subwoofer EQ: 0 - 18 dB @ 40 Hz - 100 Hz, • Variable Subsonic Freq: 10 Hz - 50 Hz • Inputs: RCA (speaker level compatible) • Subwoofer Frequency Range: 10Hz - 250 Hz • 4-ohm Mono Power: 350 watts x 1 • 4-ohm Power: 350 watts x 1 • 1-ohm Mono Power: 800 watts x 1 • 2-ohm Power: 600 watts x 1 • Subwoofer EQ Frequency: 40 Hz- 100 Hz • Variable Subwoofer EQ: 0 - 18 dB • Low-Pass Crossover Freq: 20 Hz - 250 Hz • Peak Power: 1600 watts • Crossover Slope: 24 dB • Dimensions (in Inches): 10.4" x 7.1" x 2.0" • Input Sensitivity: 0.25 V - 10.0 V • S/N Ratio: >100 dB • Total Harmonic Distortion: 0.4% at Rated Power • Strapped Output Power @ 2ohms: 1600 watts x 1 • Output Power (14.4 V) @ 4 ohm: 350 watts x 1 • Output Power (14.4 V) @ 2 ohm: 600 watts x 1 • Output Power (14.4 V) @ 1 ohm: 800 watts x 1 • Frequency Response: 10 Hz - 300 Hz