
PowerBass ASA3-1500.1D 1,500w rms @ 1 - Ohm mono block class-d amplifier To give your subwoofers some serious power at an affordable price, we offer the ASA3 range in super efficient Class D power. This line offers amplifiers that can provide up to 1,500 watts to a single woofer. PowerBass's ASA3 Class D amplifiers are always 1-ohm stable, and still come complete with all our sought after features like subsonic filters to keep ultra low frequencies from zapping power from frequencies that you do not want to reproduce and protection circuitry that will keep your amplifier from blowing up during duress. Features - • 1,500 Watt High Efficiency Class D Design • 1-OHM Stable Mono Block Amplifier • Double Sided Circuit Board Construction • Low Level RCA Input/Low Level RCA Pass Through Output • Remote Soft Delay Turn On/Off Circuit • Variable Low Pass Electronic Crossover • Variable 12dB Bass Boost EQ • Variable Gain Control • Wired Secondary Remote Gain Control Included • Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output. • Strapable Dual Amp Power Doubling Circuit (Amp-to-Amp Bridged at 2 ohm minimum) Specifications - • Selectable Subwoofer EQ: 0-18 dB Gain @ 45Hz • Variable Subsonic Freq: 15 Hz - 50 Hz • Equalization Boost/Cut: 0 - 18 dB • Subwoofer Frequency Range: 20 Hz - 150 Hz • 4-ohm Power: 500 watts x 1 • 1-ohm Mono Power: 1500 watts x 1 • 2-ohm Power: 1000 watts x 1 • Subwoofer EQ Frequency: 45 Hz • Variable Subwoofer EQ: 0 - 18 dB • Low-Pass Crossover Freq: 50 Hz -150 Hz • Peak Power: 3000 watts • Crossover Slope: 12 dB • Dimensions (in Inches): 16.6" x 9.4" x 2.3" • Input Sensitivity: 0.25 V - 6.0 V • S/N Ratio: >80 dB • Total Harmonic Distortion: 0.5% at Rated Power • Strapped Output Power @ 2ohms: 3000 watts x 1 • Output Power (14.4 V) @ 4 ohm: 1000 watts x 1 • Output Power (14.4 V) @ 2 ohm: 1000 watts x 1 • Output Power (14.4 V) @ 1 ohm: 1500 watts x 1 • Frequency Response: 20 Hz - 250 Hz

PowerBass ASA3-1500.1D 1,500w rms @ 1 - Ohm mono block class-d amplifier To give your subwoofers some serious power at an affordable price, we offer the ASA3 range in super efficient Class D power. This line offers amplifiers that can provide up to 1,500 watts to a single woofer. PowerBass's ASA3 Class D amplifiers are always 1-ohm stable, and still come complete with all our sought after features like subsonic filters to keep ultra low frequencies from zapping power from frequencies that you do not want to reproduce and protection circuitry that will keep your amplifier from blowing up during duress. Features - • 1,500 Watt High Efficiency Class D Design • 1-OHM Stable Mono Block Amplifier • Double Sided Circuit Board Construction • Low Level RCA Input/Low Level RCA Pass Through Output • Remote Soft Delay Turn On/Off Circuit • Variable Low Pass Electronic Crossover • Variable 12dB Bass Boost EQ • Variable Gain Control • Wired Secondary Remote Gain Control Included • Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output. • Strapable Dual Amp Power Doubling Circuit (Amp-to-Amp Bridged at 2 ohm minimum) Specifications - • Selectable Subwoofer EQ: 0-18 dB Gain @ 45Hz • Variable Subsonic Freq: 15 Hz - 50 Hz • Equalization Boost/Cut: 0 - 18 dB • Subwoofer Frequency Range: 20 Hz - 150 Hz • 4-ohm Power: 500 watts x 1 • 1-ohm Mono Power: 1500 watts x 1 • 2-ohm Power: 1000 watts x 1 • Subwoofer EQ Frequency: 45 Hz • Variable Subwoofer EQ: 0 - 18 dB • Low-Pass Crossover Freq: 50 Hz -150 Hz • Peak Power: 3000 watts • Crossover Slope: 12 dB • Dimensions (in Inches): 16.6" x 9.4" x 2.3" • Input Sensitivity: 0.25 V - 6.0 V • S/N Ratio: >80 dB • Total Harmonic Distortion: 0.5% at Rated Power • Strapped Output Power @ 2ohms: 3000 watts x 1 • Output Power (14.4 V) @ 4 ohm: 1000 watts x 1 • Output Power (14.4 V) @ 2 ohm: 1000 watts x 1 • Output Power (14.4 V) @ 1 ohm: 1500 watts x 1 • Frequency Response: 20 Hz - 250 Hz

Demand maximum power from your car’s audio system with the Altitude Series 1500W Monoblock Class D Amplifier from AudioControl. The A1500.1 combines premium engineered audio components and advanced technology to deliver over-the-top power with a sleek and modern aesthetic. Equipped with ParaBASS low frequency contouring and new features including Spike Mode and Valet Mode, this amplifier guarantees outstanding performance for any vehicle.

Upgrade your sound system with this compact Kenwood Marine Motorsports 4-channel amplifier. It delivers 400W total power for crisp, clear tones, and the conformal-coated circuit board keeps out moisture and salt for safe use in both land and water vehicles. This compact Kenwood 4-channel amplifier is easy to install in tight spaces for added versatility.

The link1500.1plus is the result of extensive engineering and development. The goal was an amplifier with the same power output at either 2 or 1 ohm. This amp makes 1500 watts RMS @ 2 or 1 ohm. This is achieved with our new dual rail voltage power supply. When setting up the amp, simply select the impedance of your subwoofer with the 4/2 or 1 ohm switch and the amp does the rest. At 13.11”x6.5”x1.65”, it is incredible small for a 1500 watt RMS amp. The link1500.1plus features our bassFREQ preamp, with a 24dB per octave crossover, an adjustable parametric EQ and a 24dB per octave subsonic filter. Like all Wāvtech amplifiers, the speaker level inputs of the link1500.1plus can handle up to 40V and have our adaptive loading technology. The optional linkRC remote allows for control of the subwoofer system from the vehicles front seat. The link1500.1plus is also compatible with OEM start/stop systems. link1500.1plus Features 1500 Watt Mono Amplifier 900 watts x 1 @ 4 ohms 1500 watts x 1 @ 2 ohms 1500 watts x 1 @ 1 ohm Only 13.11”x6.5”x1.65” Dual Rail Voltage Power Supply Fully Adjustable Parametric EQ Variable Low-Pass Crossover (-24dB/oct) Variable Subsonic Filter (-24dB/oct) Remote Level Control (RLC) w/Optional linkRC bassFREQ Bass Processor w/Parametic EQ Active Thermal Management Start/Stop System Compatible Adaptive OEM Load Technology 40V Input Capability Differential Balanced Inputs Variable Gain Adjustment w/Clip LED Auto Turn-On via DC-Offset or Audio Signal Detect Locking Detachable Hi-Level Speaker Terminals 0 Gauge Power/Ground Terminals Professional Grade Panel Mount RCA’s Compact Aluminum Chassis w/Detachable Mounting tabs link1500.1plus Specifications Input Sensitivity: SPK: 1-20Vrms, 2-40Vrms, RCA: 0.2V-5Vrms, 0.4V-10Vrms Max Input Voltage (SPK): 40Vrms Frequency Response: 500Hz (=0/-3dB) THD+N: 77dBA (1W, 4Ω)
| Pros for Powerbass - ASA3-1500.1D - 1500 Watt x 1 @ 1-Ohm Amplifier - Black/Gray | |||
|---|---|---|---|
| There were no pros for this product— | There were no pros for this product— | Sound Quality, Power, Size, Ease of use, Installation | There were no pros for this product— |
| Cons for Powerbass - ASA3-1500.1D - 1500 Watt x 1 @ 1-Ohm Amplifier - Black/Gray | |||
| There were no cons for this product— | There were no cons for this product— | Heat | There were no cons for this product— |
This product doesn't have any reviews yet.