Powerbass - PBM-500.1 - 500Watt x 1 (2 ohm) Mono Mini Amplifier - Black/Gray
Reviews coming soon
About this product
The new PBM Series Mini Amplifiers are the latest development from the engineering department here at PowerBass. We set out to make the world of "mini" amps better providing more power in less space but also providing clean output signal while keeping the current demand low and the power output high! The circuit boards have been conformal coated with a layer of transparent material that protects the parts against moisture, dust and extreme temperatures making the PBM series great for motorcycles and any install that might see dust and moisture in the installation area when space is limited but extreme power is needed. Features: 500 Watt High Efficiency Class D Design 2-OHM Stable Mono Block Amplifier Ultra Low Current Draw Conformal Coated PC Board Digital Sound Optimization Circuitry High Damping Control Circuit Variable Subsonic Filter High Current Voltage Ripple Rejection Circuitry Variable Low Pass Electronic Crossover Variable 12dB Bass Boost EQ Variable Gain Control Wired Secondary Remote Gain Control Included Specifications Peak Power: 600 watts x 1 Subwoofer Frequency Range: 10 Hz - 250 Hz Power Supply: Unregulated PWM Inputs: RCA Dimensions (in Inches): 7.3"x4.43"x2" Channels (mono): 1 4-ohm Power: 250 watts x 1 4-ohm Mono Power: 250 watts x 1 2-ohm Power: 500 watts x 1 1-ohm Mono Power: N/A Selectable Subwoofer EQ: 0-18 dB Gain @ 45Hz Variable Subsonic Freq: 10 Hz - 50 Hz Equalization Boost/Cut: 0 - 18 dB Height: 2" Width: 4.43" Subwoofer EQ Frequency: 45 Hz Variable Subwoofer EQ: 0 - 18 dB Low-Pass Crossover Freq: 50 Hz - 250 Hz High-Pass Crossover Freq: N/A Crossover Slope: 24 dB Input Sensitivity: 0.25 V - 10.0 V S/N Ratio: >85 dB Total Harmonic Distortion: 0.4% at Rated Power Strapped Output Power @ 2ohms: N/A Output Power (14.4 V) @ 4 ohm: 250 watts x 1 Output Power (14.4 V) @ 2 ohm: 500 watts x 1 Output Power (14.4 V) @ 1 ohm: N/A Frequency Response: 10 Hz - 300 Hz
Features
Key Feature
500 Watt High Efficiency Class D Design
Key Feature
2-OHM Stable Mono Block Amplifier
Key Feature
Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
Key Feature
Ultra Low Current Draw
Key Feature
Conformal Coated PC Board
Specifications
- Amplifier ClassDNumber Of Channels1Bass BoostVariable
Reviews
This product doesn't have any reviews yet.
Compare similar products

The new PBM Series Mini Amplifiers are the latest development from the engineering department here at PowerBass. We set out to make the world of "mini" amps better providing more power in less space but also providing clean output signal while keeping the current demand low and the power output high! The circuit boards have been conformal coated with a layer of transparent material that protects the parts against moisture, dust and extreme temperatures making the PBM series great for motorcycles and any install that might see dust and moisture in the installation area when space is limited but extreme power is needed. Features: 500 Watt High Efficiency Class D Design 2-OHM Stable Mono Block Amplifier Ultra Low Current Draw Conformal Coated PC Board Digital Sound Optimization Circuitry High Damping Control Circuit Variable Subsonic Filter High Current Voltage Ripple Rejection Circuitry Variable Low Pass Electronic Crossover Variable 12dB Bass Boost EQ Variable Gain Control Wired Secondary Remote Gain Control Included Specifications Peak Power: 600 watts x 1 Subwoofer Frequency Range: 10 Hz - 250 Hz Power Supply: Unregulated PWM Inputs: RCA Dimensions (in Inches): 7.3"x4.43"x2" Channels (mono): 1 4-ohm Power: 250 watts x 1 4-ohm Mono Power: 250 watts x 1 2-ohm Power: 500 watts x 1 1-ohm Mono Power: N/A Selectable Subwoofer EQ: 0-18 dB Gain @ 45Hz Variable Subsonic Freq: 10 Hz - 50 Hz Equalization Boost/Cut: 0 - 18 dB Height: 2" Width: 4.43" Subwoofer EQ Frequency: 45 Hz Variable Subwoofer EQ: 0 - 18 dB Low-Pass Crossover Freq: 50 Hz - 250 Hz High-Pass Crossover Freq: N/A Crossover Slope: 24 dB Input Sensitivity: 0.25 V - 10.0 V S/N Ratio: >85 dB Total Harmonic Distortion: 0.4% at Rated Power Strapped Output Power @ 2ohms: N/A Output Power (14.4 V) @ 4 ohm: 250 watts x 1 Output Power (14.4 V) @ 2 ohm: 500 watts x 1 Output Power (14.4 V) @ 1 ohm: N/A Frequency Response: 10 Hz - 300 Hz

Make your music rock harder with the help of an amplifier with enough power to take your car audio to the next level the Planet Audio AC1500.1 1500 Watt Monoblock Amplifier.This Planet Audio mono amp can handle 1500 watts of max power, and 563 or 1125 watts of RMS power. It features a continuously variable low pass crossover, low level inputs and outputs, power and protection LEDs, heavy duty set screw style terminals, and chrome plated connections. It has it all.Easily power and tune your audio system with total control over your bass thanks to the included remote bass knob. You can easily adjust your bass levels without having to get back to where your amplifier is grounded.

Enhance music with this KICKER CX-Series Mono amplifier. The three-second delay when turning this device on or off eliminates unwanted interference, while the subsonic filter removes potentially damaging frequencies. This KICKER CX-Series Mono amplifier has a compact design for easy installation, and the Fail-safe Integration Technology-PLUS provides compatibility to work with almost any radio.

Borrowing from Powerbass's former ACS series, these new amplifiers offer upgraded features, terminals and a dual layer PCB all packed in the most compact chassis allowable. To accomplish this they selected SMD parts and engineered a brand new high density heat sink engineered for maximum efficiency and cooling. The result, an all new line-up of two, four, five and mono channel models that offer amazing performance and fantastic value. Ultra efficient, the PB Series amplifiers produce plenty of low distortion high fidelity audio in a footprint small enough to fit nicely in nearly any vehicle. The PB Series Amplifiers provide the perfect mix of performance and style in a sleek new compact chassis. Features: 500 Watt High Efficiency Class D Design 1-OHM Stable Mono Block Amplifier MOSFET Power Supply High Level (Speaker)/Low Level (RCA) Input Remote Soft Delay Turn On/Off Circuit Variable Low Pass Electronic Crossover Selectable 12dB Bass Boost EQ Remote Level Control Port (for optional PB-GAIN1 controller) Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output. Specifications: Peak Power: 1000 watts Subwoofer Frequency Range: 10 Hz - 250 Hz Power Supply: Unregulated PWM Inputs: RCA, 1 Pair Input, 1 Pair Speaker Level Input Dimensions (in Inches): 9.7" x 7.1" x 2.0" Depth: 9.7" Channels (mono): 1 Variable Subsonic Freq: Variable 15 Hz - 50 Hz Equalization Boost/Cut: Switchable 0/12 dB @ 45Hz Height: 2.0" Width: 7.1" Switchable Subwoofer EQ: 0 / +12 dB @ 45 Hz Subwoofer EQ Frequency: 45 Hz Variable Subwoofer EQ: Switchable 0/+12 dB Low-Pass Crossover Freq: Variable 30 Hz - 250 Hz Crossover Slope: 12 dB Input Sensitivity: 0.25 - 6.0 Volts S/N Ratio: >90 dB Total Harmonic Distortion: 0.5% at Rated Power Strapped Output Power @ 2ohms: N/A Output Power (14.4 V) @ 4 ohm: 200 watt x 1 Output Power (14.4 V) @ 2 ohm: 300 watt x 1 Output Power (14.4 V) @ 1 ohm: 500 watt x 1 Frequency Response: 10 Hz - 250 Hz
| Pros for Powerbass - PBM-500.1 - 500Watt x 1 (2 ohm) Mono Mini Amplifier - Black/Gray | |||
|---|---|---|---|
| There were no pros for this product— | There were no pros for this product— | Sound Quality, Power, Size, Ease of use, Price | There were no pros for this product— |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.




































