Stryker - SR-A10 Center Load CB 10-Meter Antenna, Trucker Semi Truck, 26-30 MHz Tunable, 3/8"-24 Thread, Stainless Steel, Blue LED - Gray

The Stryker SR-A10 (model SRA10) is a center-load mobile CB radio and 10-meter antenna engineered for semi trucks, pickup trucks, and commercial vehicles running high-powered CB and 10-meter radio setups. The air-wound coil is wound with 6-gauge solid copper wire and housed inside a double-wall coil cover made from high-impact Mobay thermoplastic sealed with O-rings at both ends, keeping the coil fully protected from road debris, ice buildup, and moisture — a critical advantage over exposed open-coil designs. A standard 3/8"-24 threaded base fits any mirror bar mount, 3-way CB mount, or heavy-duty ball mount; coaxial cable connects to the mount, not the antenna base, and is sold separately. The SR-A10 is tunable across the full 26-30 MHz HF band, covering all 40 CB channels on the 11-meter band and the 10-meter amateur radio band, with a built-in blue LED that illuminates on transmit. Compatible with CB radios from Cobra, Uniden, Midland, President, Galaxy, and Stryker.

• 6-Gauge Copper Air-Wound Coil for CB & 10-Meter: Built around a 6-gauge solid copper air-wound coil, the SR-A10 is designed to handle high-powered CB and 10-meter mobile radio transmissions. The copper coil construction prioritizes conductivity and durability for daily use on semi trucks, pickups, and commercial vehicles operating on the 26-30 MHz HF band.
• Double-Wall Sealed Coil Cover, Weather Protected: The coil is enclosed in two layers of high-impact Mobay thermoplastic sealed with precision O-rings at the top and bottom. This weatherproof design blocks moisture, ice, and road debris from degrading the coil — a key structural difference from open-coil CB antennas used by competing products. Tested for outdoor mobile use in all weather conditions.
• Tunable 26-30 MHz: All 40 CB Channels & 10-Meter: The SR-A10 tunes across the full 26-30 MHz range, covering all 40 CB channels on the 11-meter band and the 10-meter amateur radio band (28-29.7 MHz). Trim the stainless steel whip to dial in the lowest SWR for your target frequency. Compatible with CB radios from Cobra, Uniden, Midland, President, Galaxy, and Stryker. Note: 10-meter transmit requires an FCC amateur radio license.
• 3/8"-24 Threaded Base, Mirror & 3-Way Mount Ready: The standard 3/8"-24 threaded base fits any mirror bar mount, 3-way CB mount, or heavy-duty ball mount without adapters — the most common mount types used on semi trucks and pickup trucks. Note: coaxial cable connects to the mount, not the antenna base. Mount and coaxial cable are not included and sold separately.
• Blue LED Transmit Indicator, Stainless Steel Build: A built-in blue LED in the coil housing lights up on key-down, providing a visible transmit indicator for the operator. The 10-inch stainless steel lower shaft and 49-inch stainless steel whip deliver corrosion resistance for long-term outdoor mobile use on trucks and commercial vehicles.
• 6-Gauge Copper Air-Wound Coil for CB & 10-Meter: Built around a 6-gauge solid copper air-wound coil, the SR-A10 is designed to handle high-powered CB and 10-meter mobile radio transmissions. The copper coil construction prioritizes conductivity and durability for daily use on semi trucks, pickups, and commercial vehicles operating on the 26-30 MHz HF band.
• Double-Wall Sealed Coil Cover, Weather Protected: The coil is enclosed in two layers of high-impact Mobay thermoplastic sealed with precision O-rings at the top and bottom. This weatherproof design blocks moisture, ice, and road debris from degrading the coil — a key structural difference from open-coil CB antennas used by competing products. Tested for outdoor mobile use in all weather conditions.
• Tunable 26-30 MHz: All 40 CB Channels & 10-Meter: The SR-A10 tunes across the full 26-30 MHz range, covering all 40 CB channels on the 11-meter band and the 10-meter amateur radio band (28-29.7 MHz). Trim the stainless steel whip to dial in the lowest SWR for your target frequency. Compatible with CB radios from Cobra, Uniden, Midland, President, Galaxy, and Stryker. Note: 10-meter transmit requires an FCC amateur radio license.
• 3/8"-24 Threaded Base, Mirror & 3-Way Mount Ready: The standard 3/8"-24 threaded base fits any mirror bar mount, 3-way CB mount, or heavy-duty ball mount without adapters — the most common mount types used on semi trucks and pickup trucks. Note: coaxial cable connects to the mount, not the antenna base. Mount and coaxial cable are not included and sold separately.
• Blue LED Transmit Indicator, Stainless Steel Build: A built-in blue LED in the coil housing lights up on key-down, providing a visible transmit indicator for the operator. The 10-inch stainless steel lower shaft and 49-inch stainless steel whip deliver corrosion resistance for long-term outdoor mobile use on trucks and commercial vehicles.
• 6-Gauge Copper Air-Wound Coil for CB & 10-Meter: Built around a 6-gauge solid copper air-wound coil, the SR-A10 is designed to handle high-powered CB and 10-meter mobile radio transmissions. The copper coil construction prioritizes conductivity and durability for daily use on semi trucks, pickups, and commercial vehicles operating on the 26-30 MHz HF band.
• Double-Wall Sealed Coil Cover, Weather Protected: The coil is enclosed in two layers of high-impact Mobay thermoplastic sealed with precision O-rings at the top and bottom. This weatherproof design blocks moisture, ice, and road debris from degrading the coil — a key structural difference from open-coil CB antennas used by competing products. Tested for outdoor mobile use in all weather conditions.
• Tunable 26-30 MHz: All 40 CB Channels & 10-Meter: The SR-A10 tunes across the full 26-30 MHz range, covering all 40 CB channels on the 11-meter band and the 10-meter amateur radio band (28-29.7 MHz). Trim the stainless steel whip to dial in the lowest SWR for your target frequency. Compatible with CB radios from Cobra, Uniden, Midland, President, Galaxy, and Stryker. Note: 10-meter transmit requires an FCC amateur radio license.
• 3/8"-24 Threaded Base, Mirror & 3-Way Mount Ready: The standard 3/8"-24 threaded base fits any mirror bar mount, 3-way CB mount, or heavy-duty ball mount without adapters — the most common mount types used on semi trucks and pickup trucks. Note: coaxial cable connects to the mount, not the antenna base. Mount and coaxial cable are not included and sold separately.
• Blue LED Transmit Indicator, Stainless Steel Build: A built-in blue LED in the coil housing lights up on key-down, providing a visible transmit indicator for the operator. The 10-inch stainless steel lower shaft and 49-inch stainless steel whip deliver corrosion resistance for long-term outdoor mobile use on trucks and commercial vehicles.