2-Channel or Mono Amplifier Installation (Hardware Not Included)
User rating, 4.6 out of 5 stars with 1351 reviews.
4.6(1,351 Reviews)- 47 Answered Questions
How it's going to work:
- Every few minutes, we're going to release more inventory.
- Shortly, the button below will turn back to yellow (unless we sell out).
- At that point, try adding it to your cart again.
Pro Tip: If that works, checkout as fast as you can. It won't be reserved until you are in checkout. Good luck!
Cardmember Offers
carousel
Description
Features
Preparing your vehicle
We'll go through a preinstallation checklist so we can return your vehicle in the same condition as when you dropped it off.
Factory-installed look and functionality
We'll connect your control interface to the proper circuits, complete any required programming and/or flashing, and mount and conceal the control module for a professional look.
Final steps
To finish, we'll perform a postinstallation checklist, vacuum the work area, and give you a demonstration of the control interface's features.
How to redeem and schedule your installation:
After ordering, you'll get a redemption e-mail containing a key code that validates your order. Find your nearest installation center and call to schedule an appointment.
What to bring to your installation appointment:
Bring a printout of your redemption e-mail, the amplifier you want installed, and any other parts you may have purchased for the installation.
*Standard installation does not include vehicle-specific parts or accessories. For amplifier installation, the cost of parts will vary. Such parts and any additional parts or extensive labor are extra.
Your Geek Squad Autotech will provide an estimate prior to performing work that requires an additional charge (including nonstandard installation) and any additional parts. Any additional charges will be assessed after the installation is complete.
For installation information for your vehicle, find a store with an installation center and speak with a Geek Squad Autotech.
General
- Product Name2-Channel or Mono Amplifier Installation (Hardware Not Included)
- BrandGeek Squad®
Other
- UPC400036281358
Customer rating
Rating 4.6 out of 5 stars with 1351 reviews
(1,351 Reviews)Customer images
Search
Rating 5 out of 5 stars with 1 review
George was very professional Highly recommended
|Posted .Highly recommended the Geek Squad Automobile Staff is very knowledgeable on Automotive Electronics... I have a Total Tech Membership which I think is a great value if your looking to have muliti installations... I purchased a Kenwood 10.1 inch HD Double Din Stereo that Bestbuy doesn't carry from Crutchfield that George from the Otay Ranch location was happy to install thats the benefit Total Tech Members have... You can purchase a product from a other store other than Bestbuy and have them install it... George is very professional and gave me recommendations solutions & answers to all my questions... The installs were all clean and seamlessly... George even went a step further by goings above & beyond with my install by connecting my Stereo Audio System via the big 3 for those that know what the big 3 is its a must in a great hi profile car audio install system google it if you don't know it was greatly appreciated... George also connected my 4 Channel amplifier underneath my seat perfectly so its unnoticeable so thiefs won't be able to see via window but is easily accessible just by pulling the seat forward... George also connected a two 2 way 6 1/2 inch Component Speakers and 2 tweeters and crossovers which he installed in the front car doors and tweeters in dash which sound and look great no problems with my windows or switches ... Its been over 3 weeks since my installation I wanted to leave this review earlier but I was definitely enjoying my system and made sure it was all was functioning properly... Thanks again George will definitely be back to install a blind spot side view camera
This review is from 2-Channel or Mono Car Amplifier Installation
I would recommend this to a friendRating 5 out of 5 stars with 1 review
Excellent
|Posted .Seaton installed our entire sound system. Extremely knowledgeable, great communication and excellent installation work.
This review is from 2-Channel or Mono Car Amplifier Installation
I would recommend this to a friendRating 4 out of 5 stars with 1 review
Amp Install
|Posted .Recently installed my amp and wires. They did great installing it and setting it up. Also did great problem solving the issues from the line out converter. Wish they would have hid the wires a little better. Will have to unhook a few wires and run them around rear back seats to hid it better. Other than that everything as been working perfectly.
This review is from 2-Channel or Mono Car Amplifier Installation
I would recommend this to a friendRating 5 out of 5 stars with 1 review
Audio Install was top notch
|Posted .I would recommend this to a friendI cannot not say EXCELLENT loud enough to describe the timliness, professionalism and quality of this install. My technician was EXTREMELY knowledgable about the vehicle and the install. He was creative and worked hard to ensure my install was top notch. Thank you again.
Rating 5 out of 5 stars with 1 review
Installed subwoofers and amp purchased elsewhere
|Posted .Great service and had it done before they said it would be done. Had one problem but they took my car back in and fixed it, so it wasn't a big issue. I will be coming back for my next sub install.
This review is from 2-Channel or Mono Car Amplifier Installation
I would recommend this to a friendRating 5 out of 5 stars with 1 review
Amplifier
|Posted .This item is great. I am happy with the purchase thankfully
This review is from 2-Channel or Mono Car Amplifier Installation
I would recommend this to a friendRating 4 out of 5 stars with 1 review
Professional installation
|Posted .The installer, I believe his name is Tony, was very attentive, professional, did a very good job. The only issue I have with purchasing installation services is that appointments near my home were not available and when you call Best Buy to speak with someone, takes forever and almost impossible.
I would recommend this to a friendRating 5 out of 5 stars with 1 review
Sound system
|Posted .Was quick and el well done. Friendly and knowledgeable
This review is from 2-Channel or Mono Car Amplifier Installation
I would recommend this to a friend
Q: QuestionWill they perform this installation with customer supplied parts?I bought absolutely everything I would have needed to install this on my own (Wiring kit, subwoofer, enclosure, amp) and I recently realized that I don't feel comfortable doing this install myself. Will BestBuy still do it with the parts I bought elsewhere?
Asked by Tyler.
- A:Answer They did with me. I brought along an amp wiring kit that was a lot less expensive than what they would've used and just told them to use that. They even gave me back parts that they didn't use.
Answered by Anonymous
Q: QuestionI'm looking to install a 1x15 in my 2012 mustang that has the factory shaker 500. Can I LOC from the rear speakers to the sub amp cleanly? Thanks
Asked by Nick.
- A:Answer That depends if you have a factory amplifier or not. If you don't then yes you can tap into any one of your speakers. If you do have a factory amp, you have to tap into the speaker wires before the factory amplifier. Otherwise there's a mix-up between signals.
Answered by JAL89
Q: Questionhello, im trying to hook up my aftermarket amp through the factory amp speaker wires that run to it. After i cut my RCA cable there are 4 wirescoming out, grey,white,red,black. All i need to know is which ones are + and - for the right and left ? Thanks!!
Asked by joee.
- A:Answer Oh my God dude, stop what you're doing right now! You can't just talk cut RCA wires and hook to speaker inputs Because speaker inputs are considered high level and RCA is NOT! I suggest looking into buying a high level input converter, unless of course you wanna blow up your amp wreck other electrical things and maybe even start a fire!!!
Answered by itechgeektim
Q: QuestionPrice questionHow much would you charge just to tune in my amplifier. I already have it installed and connected to everything but I don't know how to adjust it to my subwoofer. Could you shoot me quote on about how much this would cost? Thanks, Jake
Asked by Jake.
- A:Answer There is no set price for tuning a stereo system. Our normal shop fee is 24.99 per 15 minutes of work. I would say at least a half hour of work to get things dialed in and sounding good
Answered by aotech837
Q: QuestionHow much does the Geek Squad charge for a subwoofer install? I have a JBL GTBassPro12 which has the amp built into the enclosure with the sub. How much would yall charge for installing that. I have purchased an amp wiring kit also.
Asked by Chellzo.
- A:Answer Depending on how the wiring goes for the JBL GT BassProl2, you should be looking at $99.99 for the amp installation fee, $5 materials charge fee, and if it is being attached to the factory radio there could be a custom labor charge assessed. It sounds like you're ready to go with all the parts, so please speak with your local Autotech to schedule your appointment today!
Answered by GeekSquadSupport