Audio-Technica - Audio Technica AT-XP7/H Headshell Combo Kit - Black
- Key Specs
- Accessory Type: Turntable Accessory
- Model Compatibility: asset://embedded/asset/id/bed8375f-8e90-493f-89ef-0f40930c3f43/filename/at-xp7-h-04.png
- General
- Product Name: Audio Technica AT-XP7/H Headshell Combo Kit
- Brand: Audio-Technica
- Model Number: AUD ATXP7H
- Features
- Accessory Type: Turntable Accessory
- Compatibility
- Model Compatibility: asset://embedded/asset/id/bed8375f-8e90-493f-89ef-0f40930c3f43/filename/at-xp7-h-04.png
- Warranty
- Manufacturer's Warranty - Parts: U.S. ONE-YEAR LIMITED END-USER WARRANTY
- Manufacturer's Warranty - Labor: U.S. ONE-YEAR LIMITED END-USER WARRANTY
- Other
- UPC: 4961310146559
The AT-XP7/H combo kit includes the AT-XP7 DJ cartridge premounted on the AT-HS6BK headshell.
Features
- 0.3 x 0.7 mil elliptical bonded stylus tip - Highly rigid, lightweight polyphenylene sulfide (PPS)/glass fiber body - 6.0 mV high-output level - Tracking force of 2.0 to 4.0 grams (3.0 grams standard) - Stainless wire suspension, double-layered rubber damper and tapered aluminum cantilever ensure precise tracking - Design offers maximum visibility of the stylus tip - Great tracking and channel separation for high-fidelity sound - Universal ½"-mount headshell for 4-pin turntable cartridgesSpecifications
- Frequency Response: 20-20,000 Hz - Channel Separation: 22 (dB at 1 kHz) - Vertical Tracking Force: 2.0-4.0 g (3.0 g standard) - Stylus Construction: Bonded round shank - Recommended Load Impedance: 47,000 ohms - Output: 6.0 mV (1 kHz, 5 cm/sec.) - Channel Balance: 2.0 dB (1 kHz) - Stylus Shape: 0.3 x 0.7 mil elliptical - Cantilever: Aluminum tapered pipe - Mount: Half-inch - Replacement Stylus: ATN-XP7 - Coil Impedance: 6.7 k ohms (1 kHz) - DC Resistance: 990 ohms - Recommended Load Capacitance: 100 to 200 pF - Vertical Tracking angle: 20° - Dimensions: 17.2 mm (0.68") H × 17.8 mm (0.67") W × 28.3 mm (1.20") D - Weight (Cartridge): 6.2 g (0.22 oz) - Dimensions (Cartridge and Headshell): 21.2 mm (0.83") H × 21.4 mm (0.84") W × 62.4 mm (2.46") D - Weight (Cartridge and Headshell): 15.6 g (0.55 oz) - Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, two nuts, non-magnetic screwdriver- Frequency Response: 20-20,000 Hz
- Stylus Construction: Bonded round shank
- Stylus Shape: 0.3 x 0.7 mil elliptical
- Cantilever: Aluminum tapered pipe
- Recommended Load Impedance: 47,000 ohms
- Mount: Half-inch
- Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, two nuts, non-magnetic screwdriver
Product Manuals
Q: What is the purpose of the highly rigid, lightweight polyphenylene sulfide (PPS)/glass fiber body?
A: The highly rigid, lightweight polyphenylene sulfide (PPS)/glass fiber body ensures great tracking and channel separation for high-fidelity sound.
Q: What is the standard tracking force for this cartridge?
A: The standard tracking force for this cartridge is 3.0 grams.
Q: Is the headshell compatible with all 4-pin turntable cartridges?
A: This universal ½"-mount headshell is compatible with 4-pin turntable cartridges.
Q: will this fit and work on a 'vintage' Technics SL-3200 semi auto turntable?
A: Yes, it will.
Q: Is this what your sound come from?
A: Please call for further assistance.
Q: I am replacing the cartridge on Dual 1214 and wondering if this will fit.
A: You may use the cartridge itself, the AT-XP3, but not the headshell that is provided with the AT-XP3/H Headshell/Cartridge Combo Kit. You must use the proprietary angled Dual headshell and the Dual cartridge sled (aka carrier or clip).
A: Yes, it will.
A: Yes, it will, and it just happens to be set at the correct overhang, 15.5mm
