About this item
Easily add an aftermarket amplifier or subwoofer to your vehicle’s factory audio system with this 2-Channel Active Line Output Converter with AccuBASS by AudioControl. The LC2i converts speaker-level (high-level) audio signals to RCA preamp (low-level) signals so you can install an aftermarket amplifier or subwoofer without replacing your factory radio. This two-channel line output converter also features AccuBASS technology so you can turn up the volume without losing bass.
Compatible with most vehicles’ OEM audio systems
For use when adding aftermarket amplifiers to car audio systems without RCA preamp outputs.
2-channel interface with dual amplifier preamp outputs
Features one set of active speaker-level inputs, one set of full range main line-level outputs, and one set of low-passed (1000 Hz) bass line-level outputs for adding an aftermarket subwoofer.
400W (40V) peak power input per channel @ 20k ohms
For high-quality sound.
9.5V RMS (13V peak) maximum output voltage @ 14.4V
For efficient operation.
AccuBASS processing
Recovers bass frequencies lost at higher volumes.
Turn-on trigger mode switch
Choose between GTO Signal Sense (DC offset) to automatically power the line output converter or remote 12V input for manual control.
Dual variable stereo gain controls with clipping indicator
Allows you to adjust main and bass output signals from -12dB to +12dB and indicates when levels are optimal.
Selectable ground isolation
Choose from common, ISO (default), or 200 ohms.
Slim chassis with integrated mounting brackets
Enables quick and easy installation.
Optional dash remote
Allows you to add a subwoofer with independent level control (ACR-1 sold separately).
5-year warranty
To protect against defects in materials and workmanship.
What's Included
AudioControl 2-Channel Active Line Output Converter with AccuBASS
Speaker connectors
Power connectors
User manual
Manuals & Guides
User Manual
Warranty Manual
Product Datasheet/Brochure
Key Specs
Maximum Power Handling400 wattsNumber Of Channels2Signal-to-Noise Ratio (SNR)110 decibels
General
Product Name2-Channel Active Line Output Converter with AccuBASSBrandAudioControlVehicle CompatibilityMost vehicles with factory-installed audio systemsModel NumberLC2iColorBlackColor CategoryBlack
Features
Output Level ControlAdjustableNumber Of RCA Outputs4Maximum Input Voltage40 voltsMinimum Frequency Response33 hertzMaximum Frequency Response100 kilohertzInput(s)SpeakerAuxiliary InputNoOutput(s)RCA
Dimension
Product Height1.5 inchesProduct Length3.25 inchesProduct Width5.4 inchesProduct Weight1 pounds
Warranty
Manufacturer's Warranty - Parts5 yearsManufacturer's Warranty - Labor5 years
Other
UPC855814005891
Search
- A: AnswerYes. You can run rca cables for “main” output and for “bass” output. Mains would be to the amp you use for your door speakers and bass is obviously to the amp for your sub. Fade loss depends on how you hook up the wire inputs on the lc2i unit.
Answered by Bill
Q: Questioncan this be used with aftermarket stereo(2 answers)
A: AnswerSure, but it was designed more for factory installed systems that force audio signal processing. This removes that processed audio signal and sends a cleaned signal to your amplifier. In my case, i have a bose system in my srx and added an aftermarket subwoofer/amplifier. Whenever i would turn the volume up the bass would decrease drastically. This was intentional by bose to prevent users from blowing the factory subwoofer which also carried over to my aftermarket amp/sub. The LC2i solved this problem by eliminating the reduced bass processing and sending my amp a clean signal. Might be overkill for aftermarket stereos since you most likely will not be needing this feature and just using it as a DLCAnswered by Nicky
- A: AnswerIf you are using this just for subs then yes you can hook it up to just one speaker but if you are using a full range amp and full range speakers then you will want to hook it to both so you have stereo and left right separation. Yes unplug the speakers so there is no unnecessary stress on your speakers. It has a clip light on it
Answered by Mylc2i
Q: QuestionWould it fit a InfinityG37x with Bose system?(2 answers)
A: AnswerThe answer is yes but you need a lot of technical knowledge. I've heard it can have conflicts with high end bose systems that filter out road noise. I've also heard stories where it worked fine, just depends on how indepth your system is.Answered by Landrew
- A: AnswerYes factory radio
Answered by ClintC
- A: AnswerNo your factory speakers will be okay
Answered by ClintC
Q: QuestionCan you hook up a lc2 to an aftermarket radio(2 answers)
A: AnswerI wouldn't recommend it because the true purpose of the LC2 is to compensate for what is called bass rolloff. This is done in factory radios to prevent blowing the speakers. It's also why if you notice turning the volume up but the bass is not increasing just only the highsAnswered by Duval
Review Summary
Rating 4.7 out of 5 stars with 264 reviews
4.7Rating by feature
- 4.6Value
Rating 4.6 out of 5 stars
- 4.8Quality
Rating 4.8 out of 5 stars
- 4.7Ease of Use
Rating 4.7 out of 5 stars
Customers are saying
Customers are pleased with the easy installation, improved sound quality, enhanced bass, and compatibility of the 2-Channel Active Line Output Converter with AccuBASS. They appreciate the noticeable improvement in their car's sound system, particularly the restored bass and overall clarity. The product is considered to be a great value for its price.
This summary was generated by AI based on customer reviews.
The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.
AudioControl - 2-Channel Active Line Output Converter with AccuBASS - Black
4 payments starting at
$27.50
with
Shipping
Installation: Available at select stores
More installation info is available in checkout