Winter SaleEnds 1/19. Limited quantities. No rainchecks.Shop now

Skip to contentGo to Product SearchGo to Footer
Main Content

Jensen - JW10A 10" Subwoofer | Multi-Mount Vented Enclosure | Built-in MOSFET Powered Amplifier - Black

Model: JW10A
SKU: 10299908
$169.99
or
Finance OptionsView your offers
Sold & shipped by
WNH Distribution, Inc.
(12)
Specifications
  • RMS Power
    100 watts
    Peak Power Handling
    300 watts
    Impedance
    4 ohms
    Minimum Frequency Response
    40 hertz
    Maximum Frequency Response
    0.25 kilohertz
    Sensitivity
    88 decibels
  • Key Specs
    • RMS Power: 100 watts (The maximum amount of continuous power the device is able to handle.)
    • Peak Power Handling: 300 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
    • Impedance: 4 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
    • Minimum Frequency Response: 40 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
    • Maximum Frequency Response: 0.25 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
    • Sensitivity: 88 decibels
    • Dual Voice Coils: true
    • Woofer Size: 10"
    • Woofer Composition: Polypropylene
    • Woofer Surround Material: Rubber
  • General
    • Brand: Jensen
    • Model Number: JW10A
    • Product Name: Jensen JW10A 10" Subwoofer | Multi-Mount Vented Enclosure | Built-in MOSFET Powered Amplifier
    • Color: Black
    • Number of Subwoofers Included: 1
  • Audio Power
    • RMS Power: 100 watts (The maximum amount of continuous power the device is able to handle.)
    • Peak Power Handling: 300 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
    • Integrated Amplifier: true
  • Audio
    • Impedance: 4 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
    • Minimum Frequency Response: 40 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
    • Maximum Frequency Response: 0.25 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
    • Sensitivity: 88 decibels
  • Features
    • Dual Voice Coils: true
    • Grille Included: true
    • Marine: false
    • MOSFET Power Supply: true (A specific type of power supply with the advantages of high switching speed and efficiency at low voltages.)
  • Dimensions
    • Woofer Size: 10"
    • Product Height: 10 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
    • Product Width: 10 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
    • Product Depth: 5 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
    • Product Weight: 8 pounds (The out of box weight of the item.)
  • Design
    • Woofer Composition: Polypropylene
    • Woofer Surround Material: Rubber
    • Frame Material(s): Carpet
  • Enclosure
    • Enclosed: true
    • Enclosure Type: Vented
    • Box Material: Carpet
    • Box Covering Material: Carpet
  • Warranty
    • Warranty - Parts: 2 years
    • Warranty - Labor: None
  • Other
    • UPC: 827204118863

Jensen JW10A 10" Subwoofer in Multi-Mounting Vented Enlosure with Built-in MOSFET Powered Amplifer

  • Powerful 10" Subwoofer: This subwoofer features a black polypropylene cone with a durable black rubber surround for reliable, distortion-free bass. A 2" voice coil ensures efficient power handling and consistent performance.
  • Vented Enclosure Design: Housed in a durable, carpeted enclosure with reinforced construction, the vented design enhances output and extends low-frequency response for deeper, more impactful bass.
  • Power & Performance: Delivers 100 watts RMS and up to 300 watts maximum power. With a sensitivity of 88dB and a frequency response of 40–250Hz, it offers punchy, well-defined bass.
  • Powerful 10" Subwoofer: This subwoofer features a black polypropylene cone with a durable black rubber surround for reliable, distortion-free bass. A 2" voice coil ensures efficient power handling and consistent performance.
  • Vented Enclosure Design: Housed in a durable, carpeted enclosure with reinforced construction, the vented design enhances output and extends low-frequency response for deeper, more impactful bass.
  • Power & Performance: Delivers 100 watts RMS and up to 300 watts maximum power. With a sensitivity of 88dB and a frequency response of 40–250Hz, it offers punchy, well-defined bass.
Whats Included
  • JW10A
  • JW10A
Sponsored

Compare similar products

Jensen - JW10A 10" Subwoofer | Multi-Mount Vented Enclosure | Built-in MOSFET Powered Amplifier - Black
Jensen - JW10A 10" Subwoofer | Multi-Mount Vented Enclosure | Built-in MOSFET Powered Amplifier - Black

Jensen JW10A 10" Subwoofer in Multi-Mounting Vented Enlosure with Built-in MOSFET Powered Amplifer

5 CORE - 5Core 10 inch Slim Under Seat Car Audio Subwoofer 800W Built in Amplifier Sub Woofer Enclosure Box - Black

Product Details Description: Enhance your car's audio with this powerful 10-inch under-seat active subwoofer. With a sleek aluminum shell, it delivers deep, rich bass with a frequency range of 35 to 20 kHz. Boasting a max power of 800Watt max, this powered subwoofer offers intense bass output, reaching up to 90 dB SPL. The built-in subsonic filter ensures optimal performance, eliminating low-frequency noise. Designed for 12-24V systems and featuring 4 Ohm impedance, it seamlessly integrates with most car audio setups. Its durable 1.4-inch voice coil and 1.32-lb woofer magnet provide excellent sound clarity and durability, ensuring a premium in-car audio experience. 1: 75-90 dB SENSITIVITY - More efficient, producing louder sound with lower power, making it ideal for cars with limited power sources. 2: SAFETY FEATURES - Advanced thermal, short circuit, and overload protection ensure our subwoofer operates safely and reliably. 3: STURDY CONSTRUCTION - Made from heavy-duty aluminum, it's lightweight yet rugged, built to withstand vibrations and high temperatures in the car efficiently. 4: REMOTE CONTROL - The wired remote provides convenient access to volume and sound adjustments without needing to reach under the seat. SPECIFICATIONS: Size: 10” | Max Power: 800W | RMS Power: 150W Frequency Response: 35Hz–20kHz | Impedance: 4 Ohm Material: Aluminum Shell | Voltage: 12-24V PACKAGE INCLUDES: 1x Underseat Subwoofer 1x Speaker Level Converter 1x Wired Remote Control 1x Power Cable & Accessories

KICKER - CompC 10" Single-Voice-Coil 4-Ohm Loaded Subwoofer Enclosure - Black
4.7(58)

Boost the enjoyment of your car stereo with this Kicker CompC enclosure. The compact size is easy to install and fits smartly underneath or behind a seat, and the heavy MDF construction offers uncompromising durability. This Kicker CompC enclosure is compatible with CX600 1 subwoofers and provides a custom port design. Geek Squad Installation Recommended Visit your local Best Buy store for more information.

KICKER - Hideaway 10" Compact Powered Subwoofer - Black

When Kicker created the original Hideaway compact HS8 powered sub, they wanted to make a subwoofer that could fit almost anywhere and still deliver the performance that made Kicker famous. The HS10 sub adds the extra punch of a 10" speaker and a built-in 180-watt amplifier to give you really impressive bass response from a sub that will still fit almost anywhere. With a Kicker 10" woofer, you can expect serious low end, and you can install the HS10 under most seats to bring the bass right up close. The tough all-aluminum chassis and stylish metal grille protect the speaker and deliver great sound. High- and low-level inputs give you plenty of options for hooking up your sub, and the HS10 can accept input signals from 0.25 to 40 volts so it works with almost any vehicle without adding a line output converter.The Hideaway includes an adjustable low-pass crossover, a subsonic filter to improve efficiency, a phase switch, and a variable +6 dB bass boost adjustable with the included remote control bass knob. The HS10 also offers two auto turn-on options. The package includes a wiring harness for power, signal and remote turn-on connections with a quick-connect Molex plug to make installation simple.

Pros for Jensen - JW10A 10" Subwoofer | Multi-Mount Vented Enclosure | Built-in MOSFET Powered Amplifier - Black
There were no pros for this productThere were no pros for this productSound Quality, Size, Bass, PriceSound Quality, Bass, Size, Installation Ease

Specs

Reviews

This product doesn't have any reviews yet.

No content
Sponsored

Similar products from outside of Best Buy

sponsored
product image

Jensen - JW10A 10" Subwoofer | Multi-Mount Vented Enclosure | Built-in MOSFET Powered Amplifier - Black

Not yet reviewed

$169.99

Finance Options

My Best Buy® Credit Card
10% back in rewardson your first day of purchases when approved for the My Best Buy® Credit Card.
Buy Now, Pay Later
4 payments starting at $42.50