Klipsch - Reference Series 4" 100-Watt Passive 2-Way Height Channel Speakers (Pair) - Black
Klipsch - Reference Series 4" 100-Watt Passive 2-Way Height Channel Speakers (Pair) - Black
FREE shipping to
Specifications
- Speaker TypeSatelliteRMS Power50 watts
- Key Specs
- Speaker Type: Satellite
- RMS Power: 50 watts (The maximum amount of continuous power the device is able to handle.)
- General
- Brand: Klipsch
- Model Number: 1065840 R-41-SA
- Product Name: Reference Series 4" 100-Watt Passive 2-Way Height Channel Speakers (Pair)
- Color: Black
- Audio
- Speaker Type: Satellite
- Enclosure Type: Sealed
- RMS Power: 50 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 100 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Impedance: 8 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Number of Speakers: 2
- Number of Tweeters: 1
- Tweeter Size: 0.75 inches
- Number of Drivers: 2
- Number of Woofers: 1
- Woofer Size: 4 inches
- Connectivity
- Speaker Connectivity: Wired
- Wireless Multi-Room Audio: false (Technology that allows multiple speakers and/or soundbars to be connected wirelessly and play audio in separate rooms.)
- Audio Only Inputs: No audio only inputs
- Network Connector(s): No network connectors
- Speaker Wire Connection Type: Binding posts
- Features
- Indoor Or Outdoor Use: Indoor (Indicates the appropriate environment product was designed to be used in.)
- Dimensions
- Product Height: 6.7 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 5.7 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 13 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 6 pounds (The out of box weight of the item.)
- Included
- Cable(s) Included: None
- Warranty
- Warranty - Parts: 5 years
- Warranty - Labor: 5 years
- Other
- UPC: 743878035537
Heighten your audio experience with this Klipsch Reference Series with Dolby Atmos elevation speaker. Ideal for use in surround systems, these Dolby Atmos-enabled speakers immerse you in detailed 3D sound that brings each tune to life. The sleek, easily-mounted cabinet of this Klipsch Reference Series with Dolby Atmos elevation speaker is made of high-quality materials that enhance acoustic accuracy.
- Handles up to 100W peak power (50W continuous): For robust and controlled audio that is crisp and clear.
- 4" spun copper injection molded graphite (IMG) woofer: Along with 3/4" aluminum tweeter for a complete range of sounds.
- Dolby Atmos overhead sound effects: The addition of elevation speakers reflects sound from the ceiling to put sound anywhere in your room - making you feel like you're truly in the middle of the action.
- 2-way speaker system: Sounds like 1 source rather than several separate sources.
- Vinyl woodgrain finish: Offers a stylish look to complement your existing décor.
- Removable grille: Remains acoustically transparent while protecting the speaker's components.
- 8 ohms nominal impedance: Ensures efficient conduction of power through the speaker.
- Keyhole mounting: For on-wall elevation/surround sound use.
- Handles up to 100W peak power (50W continuous): For robust and controlled audio that is crisp and clear.
- 4" spun copper injection molded graphite (IMG) woofer: Along with 3/4" aluminum tweeter for a complete range of sounds.
- Dolby Atmos overhead sound effects: The addition of elevation speakers reflects sound from the ceiling to put sound anywhere in your room - making you feel like you're truly in the middle of the action.
- 2-way speaker system: Sounds like 1 source rather than several separate sources.
- Vinyl woodgrain finish: Offers a stylish look to complement your existing décor.
- Removable grille: Remains acoustically transparent while protecting the speaker's components.
- 8 ohms nominal impedance: Ensures efficient conduction of power through the speaker.
- Keyhole mounting: For on-wall elevation/surround sound use.
Whats Included
- Klipsch Reference Series 4" 100-Watt Passive 2-Way Height Channel Speakers (Pair)
- Klipsch Reference Series 4" 100-Watt Passive 2-Way Height Channel Speakers (Pair)
A: They are sold as a pair. We had to cut the box open at the store to confirm. Please update your system Best Buy!
A: The base of the speaker is 11 3/4” by 5 3/4”. With the slight tilt it’s about 12 1/2” at the top of the speaker. Including a photo but it should work to sit on existing speakers.
A: These speakers are designed to be "height" speakers in a Dolby Atmos setup. They are designed to compliment fronts or rears by resting on top of those speakers in an up-firing position to bounce sound off of the ceiling.
A: Yes they are. That exactly what I’m using them for since towers have Dolby Atmos speakers in them.
A: Hi, Mine are located on the front speakers that reach a total height of about 4.5 ft. (ceiling height 8ft.) My Atmos speakers are Klipsh 451a. They work well. Joe
A: I was able to mount them to the ceiling using the rocket fish speaker mounts. They are very secure and sound amazing.
Q: What should the crossover setting be for these?
A: If you are using the speakers as rear or side surrounds instead of as Dolby Atmos speakers, set the crossover to 80Hz. Otherwise the speakers will need to be set as Atmos speakers within the receiver/amplifier (the receiver will then set the crossover frequency accordingly).
Q: Description says keyhole mount for wall. I cannot see hole for it.
A: Looks like a old skeleton key hole, drywall screw fits perfect in the hole to mount on the wall, by the way amazing speakers...
Compare similar products
Heighten your audio experience with this Klipsch Reference Series with Dolby Atmos elevation speaker. Ideal for use in surround systems, these Dolby Atmos-enabled speakers immerse you in detailed 3D sound that brings each tune to life. The sleek, easily-mounted cabinet of this Klipsch Reference Series with Dolby Atmos elevation speaker is made of high-quality materials that enhance acoustic accuracy.
Build a better sound system with this Klipsch Reference bookshelf speaker. The 1-inch aluminum tweeter and square Tractrix horn provide clear, natural high tones, while the 4-inch spun-copper woofer produces deep, distortion-free bass. This Klipsch Reference bookshelf speaker lets you crank up the volume for parties with a sensitivity of 90 dB.
Set the mood in your home via music with these Klipsch speakers. The wood-grain vinyl exterior imparts a touch of sophisticated elegance to a room, while the Tractrix Horn technology provides clear, vibrant and rich musical tones. The titanium tweeter on these Klipsch speakers dampens high-frequencies to facilitate crisp, natural sound.
The RP 500SA II can be used as an up-firing immersive speaker for Dolby Atmos Technology, a height speaker or a rear surround model all with the flip of a switch. Immersive sound comes aliove from all directions, including overhead, with these Dolby Atmos enabled speakers for a hemisphere of rich, detailed sound.
| Pros for Klipsch - Reference Series 4" 100-Watt Passive 2-Way Height Channel Speakers (Pair) - Black | |||
|---|---|---|---|
| Sound Quality, Bass, Ease of use, Design | Sound Quality | Sound Quality, Bass, Size, Price, Appearance | Sound Quality |
| Cons for Klipsch - Reference Series 4" 100-Watt Passive 2-Way Height Channel Speakers (Pair) - Black | |||
| Price, Size, Power | There were no cons for this product— | There were no cons for this product— | There were no cons for this product— |
Specs
Reviews
Customers are saying
Customers have good things to say about the sound quality of the Reference Series 4" speakers, and some find them easy to mount at height. The design is well-received, and the bass is adequate for some users. However, some customers feel the speakers are somewhat expensive for what they offer, and a larger size might provide a better effect, while others were hoping for more power.
Customer Images
The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.
- Rated 5 out of 5 stars
Great purchase
They sound great!! I’m at 5.1.4 right now and will upgrade to 7.2.4 and hope neighbors won’t complain lol. Bought 2 pair in sale when they dropped down to 150
thetruth Posted
- Rated 5 out of 5 stars
Tony Amos
Sounds awesome. And a totally different sound to the surround system like this so much. I’m getting another set for the back.
Tonykennon Posted
- Rated 5 out of 5 stars
Another winner for Klipsch!!!
Like all Klipsch speakers I have purchased, these two are top shelf!! Crisp...definining and clear...perfect!
Beczar Posted