Marantz - MM7025 Stereo Power Amplifier, 2-Channel (140W x 2), Both Single-Ended RCA and Balanced XLR Inputs - Black
- Key Specs
- Continuous Watts x Channel @ Ohms: 140 Watts
- Number of Channels: 2 (The number of discrete channels of sound output. This can be a single number or multiple numbers separated by decimal(s). The first number is the primary, horizontally directed audio channels. The number after the first decimal, if applicable, is the number of subwoofer outputs or channels. The number after the second decimal, if applicable, is the number of height or atmospheric channels designed to immerse the listener by producing overhead sound effects.)
- Number of Audio Zones: 2 (Audio zones, typically designated by rooms in a home, are areas in which all speakers are dependent on the same sound source. Whether a zone encompasses one or multiple rooms, the receiver or preamp/processor is used to control all aspects of its audio and is able to select which zones receive sound.)
- Network Connector(s): No network connectors
- General
- Brand: Marantz
- Model Number: MM7025
- Product Name: MM7025 Stereo Power Amplifier, 2-Channel (140W x 2), Both Single-Ended RCA and Balanced XLR Inputs
- Color: Black
- Audio
- Continuous Watts x Channel @ Ohms: 140 Watts
- Maximum Watts x Channel @ Ohms: 140 (This is the maximum load the speaker, subwoofer or amp can drive.)
- Total Power Handling: 330 watts (How much amplifier (amplified) power (wattage) that can be handled before damaging the product.)
- Number of Channels: 2 (The number of discrete channels of sound output. This can be a single number or multiple numbers separated by decimal(s). The first number is the primary, horizontally directed audio channels. The number after the first decimal, if applicable, is the number of subwoofer outputs or channels. The number after the second decimal, if applicable, is the number of height or atmospheric channels designed to immerse the listener by producing overhead sound effects.)
- Number of Audio Zones: 2 (Audio zones, typically designated by rooms in a home, are areas in which all speakers are dependent on the same sound source. Whether a zone encompasses one or multiple rooms, the receiver or preamp/processor is used to control all aspects of its audio and is able to select which zones receive sound.)
- Minimum Frequency Response: 8 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 100 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Amplifier Type: Power amplifiers
- Signal-to-Noise Ratio (SNR): 105 decibels (The ratio of the desired signal's strength to the level of background noise. A ratio higher than 1:1, which equates to greater than 0 decibels, indicates more signal than noise.)
- Audio
- Impedance: 22 (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Inputs
- Video Only Inputs: No video only inputs (The number and type of video signal only inputs the product has.)
- Network Connector(s): No network connectors
- Line-Level Inputs: true (Also referred to as low-level inputs. Enables the amplifier to receive a sound signal from another device via RCA cables.)
- Outputs
- Speaker Connection Type: RCA, XLR
- Video Only Outputs: No video only outputs (The number and type of video signal only outputs the product has.)
- Features
- App Compatible: false (The product can be connected to a program or software application on a mobile device, which then receives collected data from the product.)
- Fan Cooled: true
- Dimensions
- Product Height: 5 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 17.3 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 14 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 23.8 pounds (The out of box weight of the item.)
- Warranty
- Warranty - Parts: 3 years
- Warranty - Labor: 3 years
- Other
- UPC: 699927121556
The Marantz MM7025 2-Channel Power Amplifier features current feedback circuitry and a high-capacity power supply - the EI-core transformer and ensures distortion-free sonic reproduction of the most complex audio sources, be it dynamic musical peaks or whispered dialog. Measuring less than 14” deep from front panel to rear speaker terminals, this stereo power amp has a sophisticated and elegant industrial design. The chimney-shaped heat sink efficiently processes the heat emitted from each side of the amp and a quiet cooling fan removes the heat from the chassis, cooling the inside. A high-sensitivity temperature sensor IC is used to control the cooling fan's rotation speed to minimize noise. This unit is equipped with a remote power control function. The RCA Remote Control input is connected to the preamp and the output can be connected to other compatible Marantz components; CD player, DVD player, Tuner, etc.
- Powerful Sound Reproduction: At 140 watts per channel (8 ohms), the Marantz MM7025 2-Channel Stereo Power Amplifier pumps incredible power into your home audio system with accurate sound reproduction and without any distortion
- Detailed and Refined Audio Quality: Owing to its substantial current capability, this power amp delivers crystal-clear audio from a multitude of complex audio sources. Experience deeper bass and wider dynamic sound whether it is a bold, action-packed sequence or soft dialogues and whispers
- Multiple Configurations: The MM7025 encourages various system configurations. Use one for dedicated two-channel listening, or use two as zone amplifiers to power speakers in different rooms without compromising on sound quality
- Noiseless Heat Dispersion Mechanism: This power amp has high-power transistors that are mounted on a forced-air thermal tunnel, which makes sure that they are always operating at ideal temperatures. The noiseless cooling fan keeps the amp cool by clearing the amount of heat generated
- Sophisticated and Elegant Industrial Design: With a depth of less than 14-inches & 5-inches in height, this power amp fits in any shelf or cabinet. The front aluminum panel is slightly curved, giving it a sleek appearance that complements any décor and looks great wherever you set it
- Best-In-Class Listening Experience: More than 60 Years of Audiophile Heritage, innovation and dedication, Marantz brings to you the best surround sound and pristine audio quality imaginable for a premium home theater experience
Whats Included
- 2-Channel power amplifier
- 68" AC power cord
- 44" Remote control cable
- User Guide
- Warranty
Q: How much does this Marantz power amplifier weigh?
A: This power amplifier weighs 23.8 pounds.
Q: Does this amplifier have a fan for cooling?
A: Yes, the Marantz MM7025 power amplifier features a quiet cooling fan to prevent overheating.
Q: What type of speaker connections does the Marantz MM7025 power amplifier offer?
A: This power amplifier uses RCA connections for speakers.
Q: What is the minimum frequency response of this Marantz power amplifier?
A: The minimum frequency response of this amplifier is 8 hertz.
Q: What is the total power handling capacity of this Marantz amplifier?
A: The Marantz MM7025 power amplifier has a total power handling of 330 watts.
Q: When you're going to have it in stock?
A: undefined
Q: Does the amp have a phono jack?
A: No. It is a power amplifier only. You need a pre-amplifier with a built in phono stage. You could also use an external phono stage and plug that into a line level input on the pre-amp like an AUX or tape input.
