NZXT - H510 Compact ATX Mid-Tower Case with Tempered Glass - Matte White

I had upgraded my tower from yesteryear model to NZXT H510. I must say that this is very convenient to access anything on the motherboard as the SSDs, HDDs and PSU(SMPS) are tucked away to the other side (in the bottom cage). Co-incidentally everything I have including, motherboard, heatsink, RAM, Graphics Cards are all Black/Red. So this case aesthetically pleasing. Without water cooling and a fairly high degree of overclocking the CPU, the temperatures are still don't go over 70 degrees, very well thought out airflow and impressively designed chassis with plenty of vents.

I was really hesitant to purchase this case in the beginning, mainly bc of the complaints of poor airflow but on the other hand I did like how simplistic it was. So I decided to take a gamble and purchased it anyways. Turns out that the airflow is actually really good with the AIO I installed! I get the temps at mid to high 30s while idle and mid 60s while under load. I would recommend this purchase to others!

I recently chose this case for my build. Worked well with my build and didn't have any problems. Only problem was taking off the front glass panel, but that was easy fixed by pushing out the panel from the inside. Just take off the back cover and push it from the inside. Other than that 5/5.

My favorite case to build in. It's small but has tons of space inside. Easily hides all cables, came with decent NZXT case fans. It's most def a solid buy. Also the metal is thick enough that it won't vibrate from a powerful case/cpu fan. Some cases are so thin that any high RPM fan will cause it to vibrate loudly. No complaints here. I 100% recommend.

I just bought this case for my new Ryzen 5 2600X build. Right away I could tell that NZXT designers really thought this case design through. I found the case to be intuitive to work with. The finished build is great looking and very functional. The cable management solution is very nice with the velcro straps for the main PSU cables and tons of anchor points for zip ties for other component wires like fans, etc. All of the cable mess is behind the motherboard panel and totally out of view even if you do a poor job with cable management. The stock case fans were quiet, but I replaced them with my Corsair LL120 fans for top and rear exhaust, and two Corsair ML120 fans for intake. The tempered glass panel is beautiful and mounts with only one thumb screw. This makes access to the inside very quick and easy. Just be careful as removing the panel can be tricky, and it is glass. The wire management side attaches with two thumb screws and is also easy to work with. I did, however, replace all the thumbscrews with better anodized versions. The stock screws are plastic gripped ones and looked cheap. This case is very much worth the money over the low budget cases. I would definitely recommend it to a friend for any workstation or gaming machine within "normal" spec and moderate overclocks. If you plan to go nuts with overclocking components you may want to spend a little more for a case with more airflow or use water-cooling.

Great case for the price! I added a few touches to it and it came out awesome. Definitely a good case for a first time builder.

Good cable.management, sturdy case, lots of room. Have bought 2 so far.

Nice case, but there was a two inch gash on the back plate that dented all the way into the other side of the plate. Other than that, everything else is awesome.