PAC - Audio Integration T-Harness for Select Chevrolet, Infiniti, Nissan, and Subaru Vehicles - Multi

Add an amplifier to nearly any radio with the KISLOC2 Stereo Line-Out Converter. Experience true sonic accuracy at any volume level with all the sparkling highs and thunderous lows of your original audio. KISLOC2 Stereo Line-Output Converter Unlike traditional LOCs the KISLOC2 is designed without inductors to deliver a completely flat frequency response at all volume levels. Using nothing more than your factory speaker wires the innovative KISLOC2 automatically converts the speaker signal into both an RCA signal and a powerful 100 milli-amp 12-volt remote wire using DC offset. Powerful enough to turn on multiple amplifiers the 12-volt remote wire delivers plenty of power without hunting for a switched 12-volt power source. Accepts up to 55 watts (16 volts) of input signal Fully compatible with standard radios and most smart radios* Delivers up to an 8-volt output signal Flat 20Hz-20kHz frequency range at all volume levels Includes a powerful 100 milli-amp remote turn-on wire. No 12V power source needed! LED indicator for DC offset turn-on *Amplifier output of smart radio must have 60 impedance or lower. What's in the Box 46KISLOC2 line output converter Owner's manual Specifications Accepts up to 55 watts (16 volts) of input signal Fully compatible with standard radios and most smart radios* Delivers up to an 8-volt output signal Flat 20Hz-20kHz frequency range at all volume levels Includes a powerful 100 milli-amp remote turn-on wire. No 12V power source needed! LED indicator for DC offset turn-on

Keep your OEM wiring intact and take the guesswork out of identifying appropriate speaker wires with the Audio Integration T-Harness for Select Buick, Cadillac, Chevrolet, and GMC Vehicles by PAC. The LPHGM51 provides speaker leads, 12V, and ground inputs for adding aftermarket audio equipment to factory non-amplified audio systems. This T-harness can be used with any line output converter, amplifier, or digital signal processor (DSP).

Easily add an aftermarket amplifier to your vehicle’s factory audio system with this 6-Channel Active Line Output Converter with AccuBASS by AudioControl. The LC7i converts speaker-level (high-level) audio signals to RCA preamp (low-level) signals so you can install an aftermarket amplifier without replacing your factory radio. This six-channel line output converter also features AccuBASS technology so you can turn up the volume without losing bass.