Questions & Answers

Q: QuestionHow to install the trim kit itself and also ventilation system RK93S30On the trim kit for the Sharp Microwave/convection # R930CS (Trim kit RK93S30) do you need to vent on the sides of the microwave or just on the top and bottom? Thanks,

Asked 13 years ago by Anonymous.

• A:Answer Sharp recommends at least 2’’ clearance on all sides. Please contact us at 1-800-237-4277 to obtain a design guide for built-ins.

  Answered 13 years ago by Sharp Advisor

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat about a trim kit for a Sharp 1000W/R-21LC

Asked 8 years ago by Anonymous.

• A:Answer Hello, checks were made and unfortunately I am not seeing where we do have a Trim Kit for the R-21LC unit.

  Answered 8 years ago by Sharp Advisor

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionwe are renovating and have a space reserved for a microwave. The cabinet opening is 27 x 16.5 The door on the upper cabinet is very close to the cabinet opening. There is 1.5 inches from the bottom of the cutout to the lower cabinet door. Thoughts?

Asked 8 years ago by mike.

Q: QuestionCan I modify this kit to work on a 27 inch wide cabinet? It looks as though I can cut to vent louvers to size.

Asked 9 years ago by Tomas.

• A:Answer Hello Tomas, thank you for reaching out to us in regards to your Sharp R930CS microwave. For further assistance with your inquiry, please contact our support center at 877-698-8475.

  Answered 9 years ago by Sharp Advisor

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionMy cabinet opening is 25 1/2 wide, by 20 3/4' high. the r-930cs seems to work, however I want to use the trim kit for this unit without major work to the cabinet. will I have the correct clearance for the unit? This will be a built in NOT a counter top

Asked 9 years ago by HappyHeart.

• A:Answer Hello HappyHeart, I looked into the trim kits for this unit, and it appears that with the dimensions you provided, the trim kit RK-93S27 should fit. However, we would need to check the depth, as the trim kit requires at least 19 1/2', and we ask that at least another inch to an inch and a half be available for proper ventilation. Please let us know if there are any other questions you may have about this unit.

  Answered 9 years ago by Sharp Advisor

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this the proper kit for the Sharp Model Number R-930CS-P?

Asked 10 years ago by Ali.

• A:Answer Thank you for your recent inquiry in regards to the trim kit for your R930CSP. We recommend using the RK93S30M trim kit with the R930SCP.

  Answered 9 years ago by Sharp Advisor

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs there a trim kit for Sharp Microwave #R-1214 Where is it available?Is there a trim kit for Sharp Microwave #R-1214 Where is it available?

Asked 10 years ago by Anonymous.

• A:Answer Thanks for your inquiry! We'd be happy to help with that. Pleae email your contact info to us at [email protected] so we can have one of our Advisors reach out to you. Thank you!

  Answered 10 years ago by Sharp Advisor

  
  Helpful (0)Unhelpful (0)ReportAnswer this question