Questions & Answers

Q: Questionwill this unit work with an apple ipod classic

Asked 7 years ago by curious.

• A:Answer As long as the device has the correct audio jack it will work just fine.

  Answered 7 years ago by jetjrVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionIs this device compatible with Apple Air Pods?

Asked 7 years ago by chooch.

• A:Answer If I were you I wouldn't bother with this junk. When you find out about the product's unreliability you will see that BestBuy return policy won't help, because it has already expired.

  Answered 7 years ago by LaloEldeCarolinaVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionI bought this last summer along with 2 sets of JCV ear buds model HA-F250BT. One of them broke so I bought another JVC ear buds model HA-FX9BT. I paired them both and as long as the new is being used it works fine, with both on new one will not HELP

Asked 7 years ago by Audrey.

• A:Answer It still thinks your broken earbuds are synced to it. I don’t have the booklet here with me, but unsync both earbuds and start over again with what your going to use. I’m sure there is a on line manual that will tell you how to unpair your headset.

  Answered 7 years ago by Paul

  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionCan this be used as a transmitter for in ear monitors? i.e. send signal from audio jack of a personal mixer, like a Behringer P16 to headphones via iPhone?

Asked 7 years ago by MrBumbles.

• A:Answer Yes, but I’m not sure if you need the iPhone for the solution. You could just go from 3.5mm headphone jack to the Aluratek Bluetooth transmitter and then pair your headphones to the aluratek transmitter. Check out our video walkthrough here: We bought this Bluetooth transmitter to listen to our tv at night with our Apple AirPods and to play our XBOX with our AirPods. To listen to any device like your tv or an audio mixer with the aluratek bluetooth transmitter, check this link: https://youtu.be/xgqlujETSSQ To listen to your XBOX with the aluratek bluetooth transmitter, check this link: https://youtu.be/pDbPaLFTjiU

  Answered 7 years ago by NexxCenturyVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionCan I use the L/R analog connectors of this device converting and sending audio signals from either my bedrooms 2014 Vizio Smart TV or my 2006 Philips micro stereo system to my Bluetooth headphones? Both devices have analog outputs.

Asked 7 years ago by Scooter42.

• A:Answer If by "L/R analog" you mean the Red and White Audio Out RCA ports then yes. This device includes a standard AUX cable for a single AUX port/headphones port as well as a Y-shaped red & white RCA cable adapter. The Bluetooth range on these transmitter/receiver units is extremely short/limited however. It will not work in an adjacent room or even in a large/long room.

  Answered 7 years ago by BeachBlondeVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionI have bluetooth I'm my car can I connect it with the Nintendo switch and if there gonna be any lagged or off for a few second

Asked 8 years ago by Nivo.

• A:Answer yes you can connect this device. there is a slight lag though.

  Answered 8 years ago by TrickVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: Questionbought this to pair with my tv and Bluetooth speakers, but I cannot figure out how to control the volume on the speakers. The tv remote does not work and there is no volume control on the speakers. volume on the receiver/transmitter doesn't work either

Asked 8 years ago by volume.

• A:Answer I've been using it with my TV fine, but found that the device can't amplify the volume, only attenuate it. In other words, increasing the volume is dependent on the TV's volume control. Now, while you don't have the TV remote, there are (almost?) always buttons somewhere on the TV for volume! On the other hand, you could get "powered" Bluetooth speakers, which have their own amplifier built-in, as well as volume control. But keep in mind that they can only amplify the audio that is being produced by the TV, so if the volume of the TV's audio is not sufficiently loud enough then what comes out of the Bluetooth speakers is not going to sound good.

  Answered 8 years ago by BaagenHantaVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionBluetooth devices have hardware limitations that prevent use while charging. I have a similar device with transmit/receive capabilities, but it doesn’t transmit while charging. Will this device transmit while charging? I don’t care about receiving.

Asked 8 years ago by Hillefied.

• A:Answer Yes, it transmits while charging.

  Answered 8 years ago by Awingnut105Verified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan I use this device to transmit music from my iPhone to my old preamp with RCA input jacks?

Asked 8 years ago by Bs.

• A:Answer Yes, that is one of the design features of this device. It comes with a mini to RCA cable specifically for this purpose. Set it up in receiver (Rx) mode and wire it to the pre-amp. Once connected to the pre-amp and powered up, verify the switch is in the Rx position. Then just follow the directions for connecting the IPad to this receiver. Sometimes you may need to adjust the volume of the sending device, this receiver and your pre-amp to get the volume levels desired. I hope this helps, I am loving this device and plan to purchase additional units for different purposes.

  Answered 8 years ago by DGraingerVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI have an MP3 player that I hook to my stereo directly with the mini jack just like the one that comes on this unit. Could I buy two of these and have them communicate with each other? Place one on the MP3 player and one on the stereo? Thanks. Chris

Asked 8 years ago by Chris.

• A:Answer Yes. One device set to transmit (Tx) connected to MP3 player. The other device set to receive (Rx) connected to RCA stereo jacks with included adapter or simply to AUX 3.5mm jack if one exists. Start pairing on each device simultaneously to pair and you should be good to go. Please note: pairing process may take up to 60 seconds to complete.

  Answered 8 years ago by Hillefied

  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes Aluratek audio receiver and transmitter pair with Philips hearing aids? I am trying to use this receiver to get Bluetooth from my hearing aids to my TV. Have not been able to get this to work.

Asked 1 month ago by JY.

Q: QuestionW I’ll this work with Philips 9050 hearing aids

Asked 1 month ago by Anonymous.

Q: QuestionI have an old Bose 3.2.1. (No Bluetooth). Will this allow me to Bluetooth it to my phone so I can play music?

Asked 2 months ago by SpecialK.

• A:Answer Possibly. It depends on if your Bose has an AUDIO INPUT. If it does, then use the Aluratek in RX mode (receiving). Pair the Bluetooth of your phone to the Aluratek in RX, then connect the Aluratek to the AUDIO INPUT on the Bose and set the Bose to that INPUT.

  Answered 2 months ago by Aluratek

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have an older rack system (Panasonic) that has a phone jack in the front of the amplifier to connect a Bluetooth adapter but there is no available RCA connection on the back of the amplifier. Is this the only way the Bluetooth adapter can be connected?

Asked 3 months ago by Mikey.

• A:Answer I used one connected to RCS jacks on my receiver and the second one plugged in to RCA jacks on my mixer on my second set up

  Answered 1 month ago by Barnzey223Verified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes it have a way I can control the volume?

Asked 3 months ago by Anonymous.

Q: QuestionWhere was this product manufactured

Asked 3 months ago by Nick.

Q: QuestionWill it make my samsung smart tv bluetooth compatible?

Asked 4 months ago by Rob.

• A:Answer What it does is allow your TV to send the audio into the Aluratek unit, then the Aluratek transmitter sends the audio to Bluetooth headphones or speakers. Contact [email protected] for additional help or setup tips.

  Answered 3 months ago by Aluratek

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan this devise help me sync two marine stereos? My friend and I are trying to sync our separate boat/marine stereos so we can play single source of music on both boats at the same time.

Asked 4 months ago by BillM.

• A:Answer I think the range of these would make this difficult. Plus Bluetooth still has delays in the technology. Our transmitters can connect to two headsets at the same time providing they are within range. Contact [email protected] if you have further questions.

  Answered 4 months ago by Aluratek

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIf the answer is yes, that would be great. Can I hook up 2 different branded Bluetooth speakers to get a fuller sound atmosphere

Asked 4 months ago by Johnp.

• A:Answer You can, but you may get some latency in the timing depending on the type of Bluetooth profile used. Send me a note to [email protected] and remind me what you are trying to do and I will send you some other tips.

  Answered 4 months ago by Aluratek

  Helpful (0)Unhelpful (0)ReportAnswer this question