Questions & Answers

Q: QuestionI have an HP hard wired how can I run two computers one connection to printer is square the other end is USB

Asked 11 years ago by Ron.

• A:Answer Install the printer "ATTACHED" on the First computer. After installation, go to the control panel under printers, right click the icon for that printer and go to "sharing". Share the printer. (you may have to enable your file and print sharing...Google it) Now go to the other computers and install a printer as normal, but when asked about "printer attached or shared", choose "shared". The printer should show up when it scans the home network as long as file and print sharing is enabled. You will still install the drivers and such, but when you print, it will go through the PC to the other wired PC and walla...it prints. This was the ONLY workaround I could find for an older all-in-one printer that would not offer win8 drivers! I installed it on my win7 machine, shared it, then installed the win7drivers onto the win8 machine as a shared network printer. Both machines print to the printer now (one is wired, the other print wirelessly through the other on the network). The only drawback, the PC it is attached to must be logged on. I didn't want to replace a 500.00 printer that I love just because of not having win8 drivers.

  Answered 11 years ago by Acemix

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (3)

Q: QuestionCan I use it in a Nintendo switch?

Asked 6 years ago by Henri.

Q: QuestionIs this compatible with the Dell Inspiron 560? Does this computer have the correct slot to plug it in? I'm buying it for someone else, so I cannot check myself.

Asked 8 years ago by mlkarpow.

• A:Answer This should work with any windows computer. All usb Ethernet plugs run off of two chips and both of them are supported in windows and already have the drivers for them

  Answered 8 years ago by Drew

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionWill this work with my fire tv stick 2?

Asked 8 years ago by Jeffrey.

• A:Answer No, Jeffrey. This adapter is only designed to work with computers.

  Answered 8 years ago by BelkinStaff

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this device come with a Windows 10 compatible driver?

Asked 9 years ago by miker.

• A:Answer I believe it does

  Answered 8 years ago by MarkVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionDoes this work with mac book pro? Any drivers are required?

Asked 9 years ago by Ram.

• A:Answer Yes it does we use them for ours but I didnt set them up but I do know they work

  Answered 8 years ago by MarkVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionDoes this work with the surface 2 pro?

Asked 9 years ago by MRBLCF.

• A:Answer Yes

  Answered 8 years ago by MarkVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: Questioncan I use this device to steam cable thru my tvi want to be able to stream cable tv and use my laptop thru the internet. Is this the device I would use or can you suggest the type of device I would need

Asked 10 years ago by Anonymous.

• A:Answer This would be ideal for the Microsoft Surface or something that has limited USB ports and you also need an Ethernet port. This would not connect you to the internet by itself, nor is it WiFi capable. You could use this to hardwire an ethernet cable to your internet router. Also it would expand your USB ports if you need more than is on your computer or tablet.

  Answered 10 years ago by GraphicsGuy

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questioncan i use this to connect a belkin router to my at&t mifi

Asked 10 years ago by k.

• A:Answer I have problems on my note 3 and Google nexus player with this hub. The drivers aren't pre-installed and have to download from.Belkin website, but both my phone and nexus player are Google lollipop 5.0 and marshmallow. I've seen etherent work on nexus players on lollipop but this is hub in particular doesn't. I used a OTG cable which let's my phone and nexus player handle usb, I don't know if that would work because this will require different drivers.

  Answered 9 years ago by Blake

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionIs this compatible with Microsoft surface 3?

Asked 10 years ago by Anonymous.

• A:Answer Works with my laptop. Will work with yours.

  Answered 9 years ago by Blake

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (4)

Q: QuestionHow to download the driver installion ?I have plugged the Hub into my lap top.....need to install the driver..it won't come up.Puerto

Asked 10 years ago by Jack.

• A:Answer You need to install the driver as administrator. Right click on the driver .exe and select run as administrator. I have done this on numerous machines.

  Answered 9 years ago by TonyVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (4)

Q: QuestionDoes this work with the Surface 3 Pro?Is it compatible with Surface 3 Pro?

Asked 10 years ago by Anonymous.

• A:Answer Yes, it is compatible with Surface pro 3

  Answered 9 years ago by Jonathan

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (5)