A:AnswerHello, thanks for reaching out. It has ceramic non-stick coating which does not contain lead, cadmium and is PTFE and PFOA free. Have a nice day. The BELLA Team.
A:AnswerYou would need a voltage converter as this is for 120v. However, there is no timing element, so it’s just the issue of downgrading the power source so that you don’t burn it out. If you’re talking about international - outside the US, it should be similar to using a curling iron.
A:AnswerHello, thanks for reaching out. No, sorry we don't have. Please see the tips here: Cleaning and Maintenance
1. Always turn off the appliance, unplug it, and allow it to cool down before cleaning.
2. You can easily remove any excess oils or crumbs without disassembling the appliance.
NOTE: NEVER SUBMERGE THE APPLIANCE IN WATER OR PLACE IT IN THE DISHWASHER.
4. For best results and preserve the non-stick coating longer, use nylon, plastic, wooden or rubber
utensils.
5. Use a soft cloth on the heating plates and occasionally a metal polish intended for stainless steel on the
outer housing. Never use abrasive scouring pads or steel wool.
6. If there is hardened batter on the plates, pour a little oil and let it sit for about 5-7 minutes.
You can then wipe clean with a paper towel.
7. Do not use the Waffle Maker for anything other than making waffles.
SO-312586_14449 Ceramic Rotating Waffle Maker_IM R2.indd 5 2016-07-29 11:44 AM
6
Hints For Care and Use of Ceramic Non-Stick Surface
• To avoid scratching the non-stick surface, do not stack objects on the grill or griddle cooking plates.
• Use medium to low heat for best cooking results. Very high temperatures can cause discoloration and
shorten the life span of any non-stick surface. If higher temperatures are necessary, preheat on medium
heat for a few minutes.
• Use only nylon, plastic, or wooden utensils with care to avoid scratching the non-stick surface. Never
cut food on the grill or griddle plate.
• Remove stubborn stains with a plastic scouring pad and mild dish washing liquid; DO NOT USE STEEL
WOOL as it will damage the non-stick surface of the cooking plates.
Steps For Stain Removal and Proper Care of Your Ceramic Non-Stick Coating
1. Identify stained areas on the cooking surface and sprinkle some baking soda on the stains.
2. Moisten the baking soda to get a paste like texture by adding some water.
3. Let the paste stand for a few minutes on the stains (not more than an hour)
4. Rub with a soft damp cloth or lightly scrub with a plastic scouring pad, wipe clean and dry thoroughly.
NOTE: Do not rub vigorously when using a plastic scouring pad and NEVER use a metal scouring pad as
this may damage the non-stick coating.
5. Repeat the cycle once again if necessary The performance and non-stick property of the ceramic nonstick coating will not be affected due to stains.
Hope this helps.
Have a nice day. The BELLA Team.
