“Milk frother doesn’t work the way i want! I want to get froth more than hot milk, what should i do? i also follow the instructions but still don’t get much froth from steam and milk!”
Answer This Question
1-4 of 4 Answers
Slant the milk container to the side and put the frother down as far as you can then rotate the cup back and forth.
Sorry, there was a problem. Please try again later.Add a little more water pass the 4 cup line for enough steam to froth. Do not place wand too far into the cup of milk just barely in the milk to froth. Always let steam escape for a few minutes after frothing to clear wand & wipe clean. Hope this helps. If you desire a hotter cup of coffee - -place in microwave for a few seconds. Enjoy!
Sorry, there was a problem. Please try again later.This ateamer wand works for like 4 secinds max. I worked at sheets and atarbues for years, this isnt going to do anything. I cant even clean it out, it wont stay on and i have water tank filled to max line
Sorry, there was a problem. Please try again later.Hello, thanks for reaching out. PREPARING CAPPUCCINO Cappuccino is a delicious blend of espresso, steamed milk and frothed milk. CAUTION: To avoid scalding or burns, do not open the water tank safety lid or remove the Filter Holder during the brewing process or when the POWER light is illuminated. NOTE: To prepare 4 cups of cappuccino, fill the carafe with 4 cups of cool, clean water for espresso + 1 steam level of water for steaming. 1. Follow the detailed procedures for brewing espresso outlined in this Instruction Manual. This should be added making reference to the previous espresso description. 2. While espresso coffee is brewing, fill a deep, metal or ceramic pitcher half full with fresh, cold skim milk and place it next to the Espresso Maker. 3. Once espresso coffee has finished brewing to the desired 4 cup mark on the Glass Carafe, turn the function knob to OFF. 4. Hold the pitcher by the handle and bring up to the steam jet. Insert the “Perfect Froth” tip just under the surface of the milk. Turn the function knob gradually to (steam). Move the pitcher in a slightly circular motion, and continue to froth the milk. REMINDER: To avoid splattering, the tip must remain just under the surface of the milk. Otherwise, splattering may occur. IMPORTANT: When frothing milk, the volume of milk will double. The top half will be frothed, the bottom half will be milk. 5. After frothing, turn the function knob back to OFF. 6. Remove the pitcher from the steam jet. CAUTION: Before removing the Filter Holder, or the water tank safety lid, turn the function knob to (steam) and wait until no further steam is emitted from the steam jet. This will allow any extra steam to be released and will clean the steam jet of any excess milk. Then turn the function knob back to the OFF position. 7. Fill a cappuccino cup 1/3 full of freshly brewed espresso. Pour in an equal amount of warm milk and spoon frothed milk on top. 8. Dust froth with cocoa powder, fresh grated nutmeg or cinnamon and enjoy a delicious, freshly brewed cappuccino. Hope this helps. The BELLA Team.
Sorry, there was a problem. Please try again later.