“Can I use this on a Legion Tower 5 With an AMD 7 5000?”
Answer This Question
1-4 of 4 Answers
Yes you can, it comes with Amd mouting brackets to interchange from the base Intel one. It has brackets for the threadripper Tr4 and base zen 3 am4 AMD cpu bracket. The 2 tier fan should worker great, but depending on your motherboard you might need to put in in the front as an intake and maybe get a pci-e vertical raiser/mount for you gpu. (If you have a big graphics card that is)
Sorry, there was a problem. Please try again later.This took a little looking into. The legion tower 5 is a prebuilt PC with a custom case, so I'm not familiar. It seems to come with two 120mm fans in the front which should be able to hold the 240mm rad. One thing to look into is how high up those fans can go. You want to make sure that the tubes at the top of the rad are higher up in the case than where the cold plates mounts to the CPU. The pump for the cooler is inside the CPU mount and has to be lower than the enter/exit tubes of the rad, to prevent air from entering the pump. That will cause bad coolant flow and also burn out the pump.
Sorry, there was a problem. Please try again later.Out of the box, no - but Corsair does sell a LGA 1700 retrofit kit for a whopping $2.99, which consist of the 4 standoff screws that you need. I would order it first and then get your cooler. The Corsair part number is: SKU CW-8960091 - hope this helps!
Sorry, there was a problem. Please try again later.Hi kaizer, We recommend that you contact Lenovo to ensure that your system supports the speed and capacity of this memory kit prior to purchasing. -Brian
Sorry, there was a problem. Please try again later.
