“I have a Denon receiver model AVR 4400 i need to know if the audio from the seating Tv-sat can play in the main zone, zone 2 and zone 3 at the same time, and witch are the settings I have to chose in the reciver to have all the 3 zones.”
Answer This Question
1-2 of 2 Answers
Short answer: Probably not, but there is a work-around I used to get the main and second zones working from the same source at the same time. Refer to section below for details. Longer answer: Refer to information on batpigword [(h t t p : / / batpigworld . com / wp /?p=160) <- remove the spaces and parens] and refer to the section on "Limitations of Multizone Setups". If your input is digital (most likely input from Tv-sat), then no. I had a similar issue in getting my 4400H set up with 2 zones. If you have a 7.x setup or less, you can try what I finally did to get at least zone 2 working. Section "Connecting 7.1-channel speakers: Bi-amp connection of front speakers" (page 65 in my copy of the owner's manual) shows how to connect a bi-amp setup for your front left and right speakers. Simply hook up the Zone 2 speakers the the Height2 left & right outputs, then configure the amp assignments to be 7.1ch (Bi-Amp) and all should work (as least for zones 1 and 2).
Sorry, there was a problem. Please try again later.Yes
Sorry, there was a problem. Please try again later.