“Connecting a simple stereo With an HDMI source plugged into the back of the projector, will the RCA red/white connections push audio back out from the projector to a basic stereo system (like a Bose CineMate GS II)? Or is the "Audio Out" connection to be used (is this the digital output???)?”
Answer This Question
1-3 of 3 Answers
All you have to do is go straight from the HDMI source into the stereo and bypass the projector. For example, have your BD/DVD player either plug into the receiver and then from the receiver to the projector. Or, most BD/DVD players have an optical output that you can plug straight into the receiver. Either way, I would think bypassing the projector is the way to go.
Sorry, there was a problem. Please try again later.I tried with the 3.5 to red/white AV cable, but no sound out of my Bose. The instructions state "connected device must be set to PCM output". I have no idea what that is... ???
Sorry, there was a problem. Please try again later.There is a "Audio Out" on the back. It is a 3.5mm jack. I run HDMI in from a Nexus Player and then audio out through the 3.5mm into a powered 2.5 speakers. You can run a cable with 3.5mm on one side and RCA red white on the other end into your Bose.
Sorry, there was a problem. Please try again later.