Questions & Answers

Q: QuestionIs it good to play video games?

Asked 3 years ago by Anonymous.

• A:Answer Hi, Yes, the Home Cinema 3200 can game. If you turn off Image Enhancement, at 1920x1080@60p with a 60 Hz frame rate, the frame latency is a low 16.67ms. Regards, Mark - The Epson Team.

  Answered 3 years ago by Epson

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionThe projector will not pickup the HDMI source, even after checking the HDMI cable with a tester to make sure cable is good. Any Suggestions?

Asked 3 years ago by Anonymous.

• A:Answer Hello. We recommend trying a different HDMI cable and source to help identify where the issue could be originating from. Verify that all input selections are properly chosen also. If the problem persists, please contact our Technical Support team by phone for assistance. Regards, Kevin - The Epson Team.

  Answered 3 years ago by Epson

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat is the minimal distance and height to setup the projector from a stand so that it could cover a screen of 150 inches? Does it have to be set up straight in front of the screen or can it be offset?

Asked 3 years ago by Swinaz.

• A:Answer Hello Swinaz. Ideally, the Home Cinema 3200 should be positioned squarely in front of the center of the screen, not at an angle. Should you need to adjust the image shape, keystone adjustments can be made on the projector. For a 150 inch screen, you can place the projector between 175 to 283 inches away from the display. Regards, Kevin - The Epson Team.

  Answered 3 years ago by Epson

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionis it recommended for outside use

Asked 3 years ago by barry.

• A:Answer Hello barry. The Home Cinema 3200 is designed to be used in a home theater setting. Unfortunately, we do not recommend outdoor use of the projector. Regards, Kevin - The Epson Team.

  Answered 3 years ago by Epson

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionmy wall is 14.5 feet away from the projector table. What would be the height and width of the screen that I could expect? (my ceiling is 9 feet and my wall is 20 feet wide.... thanks.

Asked 3 years ago by Gilden.

• A:Answer Hello Gilden. You can expect a 60 - 80 projection when the Home Cinema 3200 is placed14.5 feet away from the screen. Please visit our official Epson Support page for more details on projector placement. Regards, Kevin - The Epson Team.

  Answered 3 years ago by Epson

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan you change the bulb if it ever breaks?

Asked 4 years ago by Ralph.

• A:Answer Hello Ralph. Yes, the Projector Lamp is considered a user-replaceable part on the Home Cinema 3200. For details on the replacement process, please visit our official Epson Support page. Regards, Kevin - The Epson Team.

  Answered 4 years ago by Epson

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI’s there an extended warranty available? If so, what are the terms? Thank you.

Asked 4 years ago by Projectorshopping.

• A:Answer Hello Projectorshopping. Yes, Epson offers extended service plans that cover replacement or repair labor and/or parts required to replace or repair your product for mechanical or electrical failures due to defects in materials and workmanship. For more information, please visit the official Epson Support page. Regards, Kevin - The Epson Team.

  Answered 4 years ago by Epson

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionNew Epson projector works fine when projecting from the DVD or streaming. The picture cuts off intermittently frequently when projecting from the DirectV, It returns after a few seconds with the sound first then the picture. What is the reason for this?

Asked 4 years ago by Doc.

• A:Answer If you are. using a 30 ft HDMI …..get yourself a fiber optic hdmi….it solved my problem…

  Answered 4 years ago by SMoore

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan the 3200 project 4:3 aspect ratio

Asked 4 years ago by aspectratio.

• A:Answer Hi aspectratio, Yes, the Home Cinema 3200 can resize to a 4:3 aspect ratio. Regards, Mark - The Epson Team.

  Answered 4 years ago by Epson

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHi, can you use this to stream the Xfinity app with a Roku stick? Also how does the picture look at day time? Evening? Night? What screen works best out door? Thank you,

Asked 4 years ago by Bosox.

Q: Questionspecs= 4k feature, however, I was told it is not really 4k. Rather it is technique called pixel shifting that achieve a type of emulated 4k. Can you elaberate plz. Also, what is the significance 40,000:1 vs 100000:1 next model up? (Epson 3800)

Asked 4 years ago by M3ofIDAHO.

• A:Answer Hi M3ofIDAHO, The Home Cinema 3200 uses pixel-shifting technology. Pixel-shifting technology precisely controls three individual, high-definition LCD chips to parallel process millions of pixels allowing an HD input signal to be projected at a maximum resolution of 4096 x 2160. The dynamic range specification indicates the amount of detail that will be viewable in a projected image. This is especially noticeable in dark areas of a movie. Regards, Mark - The Epson Team.

  Answered 4 years ago by Epson

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have a ceiling mount 15’ away from a 110” diagonal screen. Will this projector work?

Asked 4 years ago by BreezeCat.

• A:Answer Hi Boogie. The Epson Home Cinema 3200 can be placed up to 377" (or 31.421) away from the screen. In order to obtain a 110" size screen, the projector will need to placed closer. For more information, please visit the official Epson Support website. Regards, Bobby - The Epson Team.

  Answered 4 years ago by Epson

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat do we need to be able to mount this from the ceiling?

Asked 5 years ago by njoy.

• A:Answer Epson has a universal ceiling mount. You can use any standard ceiling mount.

  Answered 5 years ago by GreatProjector

  Helpful (1)Unhelpful (1)ReportAnswer this questionShow more answers (1)

Q: QuestionBest speakers to get to use the Epson 3200 home cinema for backyard viewing. Projector does not have speakers

Asked 5 years ago by Cincy.

• A:Answer You must find a set of speakers with an RCA plug witch will plug in the back of projector like a set of speakers you would use on your computer they have ones with just two speakers or two speakers and a subwoofer

  Answered 5 years ago by MrwizardVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan you please tell me what the vertical offset for this projector is please?

Asked 5 years ago by JackFrost.

• A:Answer Hi Billy, The vertical offset is -60.0% to +60.0% (H center). Regards, Mark - The Epson Team.

  Answered 5 years ago by Epson

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs it wireless

Asked 5 years ago by Ivan.

• A:Answer Hi Ive, Yes, to use the Epson Home Cinema 3200 projector over a wireless network, you need to install the Epson 802.11b/g/n wireless LAN module. For details, visit the Epson support site. Regards, Alexander - The Epson Team.

  Answered 5 years ago by Epson

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes the Epson Cinema 3200 have lens memory? Does it have anamorphic aspect ratio capability?

Asked 5 years ago by Yago.

• A:Answer Hi Yago, Epson Home Cinema 3200 4K 3LCD projector does not have a lens memory. It is compatible with anamorphic wide aspect ratio. Hope this answers your inquiry. Regards, Eduard - The Epson Team.

  Answered 5 years ago by Epson

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan I set this up to do rear projection?

Asked 5 years ago by Dantheman.

• A:Answer Hi Dantheman, Yes. The Epson Home Cinema 3200 4K 3LCD projector does support rear projection. Hope this answers your inquiry. Regards, Eduard - The Epson Team.

  Answered 5 years ago by Epson

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionCan you hook this up to a Sonos system?

Asked 5 years ago by Nicky.

• A:Answer Yes but you need a device made by HDFury called arcana.

  Answered 5 years ago by Earl

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)