“How do you set the off switch automatic to go off by itself”
Answer This Question
1-2 of 2 Answers
Chico, There are 2 "sleep" features on this unit. 1. The "sleep" button on the remote is a pre-programmed feature (it is not described in the manual for some reason). To use this function, you simply press the "sleep" button on the remote. In 30 minutes the temperature setting will increase by 2 degrees, and 30 minutes after that the temperature setting will increase by another 2 degrees. Then it will stay at this new setting for 7 hours, and after 7 hours the temperature setting will return to the original setting (4 degrees lower). You can cancel sleep more at any time by pressing "sleep" again on the remote. 2. The more typical sleep mode is called "delayed stop" on this unit. To use this: --- a. The A/C must be turned ON. --- b. Press the "timer" button on the remote (or control panel on the unit). --- c. Press the up or down arrows to select how much time before the unit will turn OFF. 3. There is also a "delayed start". To use this: --- a. The A/C must be turned OFF. --- b. Press the "timer" button on the remote (or control panel on the unit). --- c. Press the up or down arrows to select how much time before the unit will turn ON.
Sorry, there was a problem. Please try again later.Hey, Chico! To set the A/C to turn off by itself, you will have to set a timer delay stop. For Delay Stop, the unit must be in the On position. First, Press TIMER button, then adjust timer setting, tap or hold the UP arrow ( ) or the DOWN arrow ( ) to change delay timer at 0.5 hour increments, up to 10 hours, then at 1 hour increments up to 24 hours. The control will count down the time remaining until start (8, 7.5, 7, etc.). The Delay Start Operation automatically selects cooling with maximum Fan speed (if Cool, eco, or Fan Only was the last mode selected) . The temperature maintained will be the same as previously set. To change the set temperature, press "mode" then Up or Down arrows until the desired temperature is indicated on the display. After 5 seconds, the control will automatically change the display back to the hours remaining until the unit will start/stop. Pressing the unit timer or On/Off button at any time will cancel the Delay Start/Stop function. The Delay Start/Stop Feature will work until the unit either starts or stops. ~Courtney
Sorry, there was a problem. Please try again later.