Questions & Answers

Q: QuestionWarranty

Asked 2 years ago by Ron.

This question was asked about the related product: GE - 24" Built-In Single Electric Wall Oven - Black on Black

Q: QuestionI need to replace a Maytag Model CWE6800ACB. Will the GE Model #JRP20BJBB fit in our wall space?

Asked 3 years ago by CCARD.

This question was asked about the related product: GE - 24" Built-In Single Electric Wall Oven - Black on Black

Q: QuestionI want to install this oven on a circuit with a 20 amp breaker. Is a 20 amp breaker sufficient?

Asked 3 years ago by Dennis.

This question was asked about the related product: GE - 24" Built-In Single Electric Wall Oven - Black on Black

• A:Answer Hello. Thanks for checking with us! Yes, 20 amperes is sufficient. We hope this information helps, and should you have any additional questions, please reach out to us!- Kianna@GEA

  Answered 3 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionReplacing a JRP15 with JRP20 under countertop: these models have not been tested/approved for install below counter top, recommended min. mounting height is 32 1/2" from the floor. I don’t see this in specs. Does this mean an installer won’t do it?

Asked 4 years ago by Rob.

This question was asked about the related product: GE - 24" Built-In Single Electric Wall Oven - Black on Black

Q: QuestionI currently have a JRP15BWBB, purchased in 2000 installed under a counter top in a cutout that fits perfectly. I would like to replace it with the JRP20BJBB. Will the JRP20BJBB fit in my current cutout space without any modifications? Thank you.

Asked 4 years ago by Rob.

This question was asked about the related product: GE - 24" Built-In Single Electric Wall Oven - Black on Black

• A:Answer Hi - Based on the information we have on these two models, the recommended cutout dimensions are the same. In reviewing the information further, these models have not been tested and approved for installation below a counter top. The recommended minimum mounting height is 32 1/2" from the floor to the bottom of the cutout. We are glad you checked. Vikki@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI am replacing a GE Built-In Single Electric Wall Oven Model No. JKP13G0T1BB with the GE 24" JRP20SKSS. Wanted to make sure the cutout would fit with the new GE 24" above.

Asked 4 years ago by Anonymous.

• A:Answer Hi there, and thanks for your interest in replacing your current wall oven with model JRP20SKSS! We appreciate your loyalty as a GE consumer and are glad to assist. The cut out for the model you are interested in should have dimensions of 22 1/2" W, a minimum of 27 5/8" to a 28 1/8" maximum for height, and a depth of 23 1/2" minimum. Your current model's cut out dimensions should be 23 5/8” D minimum and 25” W minimum. The height would have the same range of a minimum of 27 5/8” to a maximum of 28 1/8”. Unfortunately, the new model will therefore not fit into your current cut out without alteration; we regret any inconvenience this may cause. We do have other models that would be more comparable with your current cut out - JKS3000SNSS, PKS7000SNSS and JKS5000SNSS. Further important information, dimensions and diagrams for those models are provided in the installation instructions, which are available on our GE website by searching for the model number, if you wish to review those alternate options further to see if they would be a good fit for you. We are happy to help with any other concerns or questions you have. Thanks for being part of our GE Family! -Sarah@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionNeed to replace an old GE wall oven, Model #JR17002WH. Will this fit in my current space? Also does Best Buy offer installation? Cost?

Asked 5 years ago by Homeowner.

This question was asked about the related product: GE - 24" Built-In Single Electric Wall Oven - Black on Black

• A:Answer Hi Homeowner, thanks for your question! We're finding that your old wall oven has the following cutout requirements: Cabinet width: 24", width (max): 22", height (max): 28 1/8", depth (min): 24", bottom of cutout space from the floor: 32 1/2". - For the new oven that you've provided here, the cutout requirements for it are as follows: Cabinet width: 24", width (min): 22 1/2", height (min): 27 5/8", depth (min) 23 1/2", bottom of cutout space from floor: 32 1/2". Some slight modifications may need to be made to your cutout space. We would recommend speaking to a contractor or a cabinet professional for help with any modifications to the cutout space. We'd also recommend speaking to Best Buy about installation and cost of that service. We hope that this helps! Stay safe. -Michael

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questioncan this be mounted under a cooktop in a base cabinet?

Asked 7 years ago by coop.

• A:Answer the instruction manual gives you all that information or the sales person can

  Answered 7 years ago by georgeVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)