A:AnswerThis stove does not come with the LP conversion kit. The broiler is 12001BTU, burners 1 and 3 are 15000, burner 2 is 5000, burner 4 is 9500 and burner 5 is 10000.
A:AnswerThe rear trim piece is to help prevent spills and dropped items down the back of the range. It can be removed by unscrewing the 4 screws that attach it to the back of the range. For a helpful illustration, see page 2 of the Installation Instructions, which can be viewed on the JGSS66SELSS product page of our GE Appliances website. Lauren@GEAppliances
A:AnswerI recently had this unit installed. Since it went against a wall to the left and the other side was sink and countertop, my contractors left about one inch from the wall and 1/4 inch from countertop so that we could still slide the unit out for cleaning and repairs.
A:AnswerYes but probably not one inch the lifter legs will fall off. You can get strong ply wood under the legs if you need to lift that high or use leftover flooring and layer where you want to raise assuming you are tying to line up to your counter tops.
A:AnswerHey - we checked the information for this unit, and we can confirm that the sides of this range have a dark gray finish. -- We hope this answer was insightful, and please reach out to us on social media if we can help with anything else. Take care. - Pablo@GEA
A:AnswerHello- We appreciate you reaching out to us with your question. This particular slide in gas range is going to require a total of 54,500 BTU putting it over the 36,000 BTU limit. We do apologize for any inconvenience this may cause. Please reach out to us on social media if you need help finding one that will meet your specific needs. Take care! Dianna@GEA
