A:AnswerThis card only has two ports, one HDMI and one diplay port, so it supports 2 monitors I have it in a dual monitor setup, one 4k 32 inch and on HD 27 inch and it works great for me
A:AnswerHi,
This GPU is not compatible with Crossfire.
Currently no gpu in the AMD consumer line up will support multigpu configurations.
Hope this helps!
- John
A:AnswerYou can run the game with this card but it depends on what resolution. 1080p with high settings but some settings tweaked? Sure but probably only around 45 fps. I would advise going with the 6700xt card if you can.
A:AnswerHi User,
Yes this is compatible with your B560M-C. Note this is compatible with any brand motherboard as long as it has PCI Express 3.0 slots or better.
Hope this helps!
- John
A:AnswerHi AJL1125,
This graphics card is using a PCI Express Gen 4.0 connector
It is backwards compatible with Gen 3.0 without any noticeable performance drops.
You will need to check if your HP Pavillion has the clearance to install the GPU as well as the required power supply (Recommend 500watts)
Hope this helps!
- John
A:AnswerHi Tay,
The GPU will fit and is supported on the Z77 board but is only PCI Gen 3.0
For peak performance we would recommend a PCI Gen 4.0 enabled board for this card.
Hope this helps!
- John
A:AnswerYes it does. It supports only two monitors though. It has one HDMI and one display port. Which is fine if you want one for gaming and a secondary for a secondary program.
