Questions & Answers

Q: QuestionHow long is the power cord?

• A:Answer The power cord for this pressure washer is 35 feet long.

Q: QuestionWhat is the maximum pressure rating of this pressure washer?

• A:Answer This pressure washer has a maximum pressure rating of 1900 PSI.

Q: QuestionDoes this pressure washer have a warranty?

• A:Answer Yes, this pressure washer comes with a 3 year warranty on parts and labor.

Q: QuestionWhat is the maximum flow rate of this pressure washer?

• A:Answer The maximum flow rate is 1.2 gallons per minute.

Q: QuestionIs this to use on a car or is the psi too high?

Asked 1 year ago by Mike.

• A:Answer I've used a foam gun similar to the one included in this kit for years washing my cars. It's a game changer over using a mitt in a bucket of car wash suds. You can wet the car down (first), load the foam gun with straight car soap, foam the entire roof and windows with glorious bubbly foam, and then go to town with your wash mitt. When you complete a foamed section, rinse with the 40° wide nozzle, wet down the next panels, click on the foam gun and repeat the process... Dry with your favorite drying method, and wax as necessary.

  Answered 1 year ago by MarkWVerified Purchase

  Helpful (11)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionWhere does the soap go in.

Asked 1 year ago by Bevy.

• A:Answer Hi Bevy. Thank you for your question. The pressure washer detergent will go into the 'soap applicator bottle'. Ensure to follow the diluting steps from your detergent bottle, or follow 1 parts soap to 10 parts water, 1:10 ratio. Please check out the following video link for a better visual of connecting the applicator as well. We hope this helped! (https://www.youtube.com/watch?v=WsPLiO0ca9M)

  Answered 1 year ago by Greenworks Tools

  Helpful (5)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionIf you pull the trigger only part of the way, do you get less pressure? So can the trigger be pulled half way if you only want about 1000 PSI and then when you pull the trigger all the way you get 1900 PSI? Or is it all or nothing?

Asked 1 year ago by JimBob.

• A:Answer Another option is to increase the distance between the nozzle and the contact area.

  Answered 1 year ago by Carromkid

  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (4)

Q: QuestionCan I wash my indoor carpet rug with this?

Asked 1 year ago by Jay.

• A:Answer Hi Jay, Absolutely, yes you can use the pressure washer to clean removable indoor rugs outside. The unit comes equipped with Quick Connect Wand - With 15°, 25°, 40°, and soap nozzles for various applications. Please check out the link for nozzle demonstration. https://www.youtube.com/watch?v=i4Gui0t6tAU

  Answered 1 year ago by Greenworks Tools

  Helpful (5)Unhelpful (1)ReportAnswer this questionShow more answers (2)

Q: QuestionWhat cleaning solution can I put in the washer to clean my plastic outdoor gates and my wood deck? Anything else to be added to the solution? Thanks.

Asked 1 year ago by Lala.

• A:Answer Cleaner goes in plastic applicator bottle so any solution that a plastic bottle can hold.

  Answered 1 year ago by ChristopherBVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan this pressure washer be used for cleaning vinyl or aluminum house siding?

Asked 1 year ago by LIVY.

• A:Answer Hello LIVY. This unit is powerful enough to clean vinyl or aluminum house siding. One factor to consider are the nozzle tips. Each nozzle top will provide a different degree of spray allowing your to finish multiple jobs. Please check out the link below for a better visualization of the nozzles. (https://www.youtube.com/watch?v=i4Gui0t6tAU). We would recommend either the 0 degree or 25 degree nozzle. We hope this helped.

  Answered 1 year ago by Greenworks Tools

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan this be used to clean a Trek Deck? Interested if the cleaning disk will work on the Trek deck planks without damaging them.

Asked 1 year ago by Dave.

• A:Answer Hi Dave. Thank you for your interest. Yes, you can use a pressure washer to help clean of composite decking without damaging it. Take a look at the nozzle tips, as each nozzle will provide a different degree of spray. The use a 25-degree nozzle (for more stubborn build-up) to 40-degree (for newer decks with less damage or synthetic wood). We hope this helped! (https://www.youtube.com/watch?v=i4Gui0t6tAU&list=PLhkGz12Njimt3-15ghCIE2bOUHd8b3B95&index=3)

  Answered 1 year ago by Greenworks Tools

  Helpful (3)Unhelpful (0)ReportAnswer this question

Q: QuestionCan this be used to clean stucco on a house?

Asked 1 year ago by Rosy.

• A:Answer Yes, as long as the stucco is well adhered to your house! This may be small, but it's quite powerful!

  Answered 1 year ago by AdkGalVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionWill a pressure washer cause issue with my pipes at home? Worried the pressure could "fire back" or increase pressure in my spigot. Also what is spray angle of the circular surface cleaner attachnent. Is it 15, 25 or 40?

Asked 5 months ago by Rom.

• A:Answer It will not hurt your pipes. I don't know the angle but it sure works great on concrete.

  Answered 4 months ago by JOHNMVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questionis it powerful enough to clean driveway and sidewalk?

Asked 11 months ago by Linda.

• A:Answer Not my driveway... if you have rust or mold/mildew (even when using a cleaner first). Tried both the surface cleaner and blaster tip.

  Answered 11 months ago by RACnFLAVerified Purchase

  • 
  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionCan we use "Wet and Forget" along with the flush for the patio and driveway ? Please advise, thank you.

Asked 1 year ago by Harry.

• A:Answer Yes Works great

  Answered 1 year ago by NiciVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionAfter using for 1hr cleaning a driveway the pump began to leak out a gray oily substance with multiple areas where it had leaked out. Attached is a picture of the gray oily substance on piece of cardboard. What is this?

Asked 2 years ago by Buddy.

• A:Answer Hi Buddy. We are sorry to hear this happened, to help determine what may be causing the issue, we ask that you please contact us directly. Please have access to the unit so that we can complete any troubleshooting with you and gather necessary unit information, and we will be happy to assist you!

  Answered 2 years ago by Greenworks Tools

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan I replace the metal hose with a non metal hose?

Asked 4 months ago by MarvRob.

• A:Answer Hello MarvRob, Thank you for your question. The Greenworks high pressure hose that comes with this Greenworks pressure washer unit can be replaced. The connection is an m22 14mm. However, we do recommend that you replace the hose with a Greenworks branded high pressure hose as we cannot guarantee the fit, function or compatibility of a 3rd party hose.

  Answered 4 months ago by Greenworks Tools

  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionCan the water source be from a bucket?

Asked 10 months ago by Ale.

• A:Answer Hi Ale. Thank you for your question. This unit does not have a self-siphoning kit. Please take a look at the following model available with this feature, please keep in mind it needs to be fed from a water source that provides pressurized water of at least 45 PSI. We hope this helped! (60V Hybrid 1800 PSI 1.1 GPM Cold Water Pressure Washer (Tool Only) SKU 5109402T MODEL# PW18HYB) (80V 3000-PSI 2.0 GPM Electric Pressure Washer w/ (2) 4.0Ah Batteries & Dual Port Charger SKU 5124702 MODEL# PW80L420).

  Answered 10 months ago by Greenworks Tools

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionIs it OK to use this to wash cars with ceramic coating, or should I get a lower PSI washer?

Asked 1 year ago by lakersfreak.

• A:Answer Hi lakersfreak. Thank you for your question. Yes, you will want to ensure you select the highest degree nozzle available as this will provide the widest degree spray pattern. Please take a look at the following video for a better demonstration. We hope this helped! (https://www.youtube.com/watch?v=i4Gui0t6tAU)

  Answered 1 year ago by Greenworks Tools

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)