A:AnswerSandy: Unplug. Get as much water as possible
out. 2-3 cups of pink color Recreational Anti Freeze
pour into wash tub.
RV anti freeze also good in toilet tanks and bowls.
Get as much water out as possible.
All sink drains.
Do not use automotive anti freeze. Corrosive.
53224
A:AnswerThe water connection is a single fill hose designed to be connected to a faucet. The unit is sold with an adapter which connects to standard faucets. Temperature control is achieved by adjusting the water temperature at the sink. Be sure to connect the grey connection to the faucet and the white connection to the washer. Ten washer can accommodate up to 5.5 lbs of clothes.
A:AnswerHello, Robert here. In response to your question - This Haier portable washing machine includes the faucet adapter and inlet hose assembly that you will need. There is a dual male/female threaded adapter that replaces your existing aerator on your faucet. (You have the option to leave this adapter on your faucet permanently. IF you do you will lose the bubble stream aeration on your faucet.) If this is bothersome to you; you can simply thread and unthread the adapter when you decide to wash clothes. (This is what I do.) Please remember there is also a water inlet hose that couples TO the adapter to make a water tight connection at your faucet. Just remember to look at the instructions. Information is provided. This is an easy setup for many people. Happy washing - Robert.
A:AnswerYes you can connect to the faucet. This washer comes with the faucet adapter and two water supply hoses. You MUST use only one water supply hose. (This is because you are using the machine in a portable setting (faucet connection) and force the machine to only draw water from the cold water supply. All rinse cycles automatically draw only cold water. By Selecting the cold water temp setting on the machine panel for every wash, you will be able to control BOTH your wash temp and rinse temp coming into the machine by adjusting your water temperature AT THE FAUCET.)
Remove your existing faucet aerator, replace it with the supplied chrome connector. Prepare the water supply hose - White plastic end to the washer's cold water supply, the Grey end to your Faucet adapter piece (brass/white ring connector). To Connect, depress the white slip ring and press the adapter onto the chrome connector, then release white ring to make a watertight seal. Turn on your faucet, adjust your temperature, then start your machine. Once the machine begins filling with water, touch your faucet arm to check temperature accordingly. You can always use cooler water as needed to save energy and/or fabric considerations.
I just recently purchased this machine and It works well. Please read the manual, there are many wash features with each cycle that you may like. I recommend this machine, Take Care - Robert.
A:AnswerHello - The fill hose(s) and the drain hose supplied with the unit are approximately 4.5 feet long. The hoses should be replaced every 5 years. - TREY@HAIER
A:AnswerHello Acole870 - Thank you for reaching out about your washer. We are happy to help.
We do not recommend the use of garden hoses to fill the washer. Please follow the proper installation instructions found in the manual. We are sorry for any inconvenience this may cause.
Please let us know if you have any more questions. - John
A:AnswerYes. One disconcerting feature occurs when the hot water solenoid activates. It is a little noisy and the water hose actually jumps. This happens frequently during each fill cycle. More on warm than hot setting.
