Is there a special way to install ram on this null

No special way, just pull the levels at the ends of the ram sticks to the open position. Remove the current ram stick and placed the new ones in. There will be a little resistance, you'll have to push until the levers click and lock in place. You'll hear a little click when they are locked in. Just restart the computer, it should recognize the ram. Essentially a plug and play.

Is as simple as installing RAM in any motherboard, making sure you position the DIMM module using the notch as the guide. Use the same brand, model and specs as the installed one: Kinsgton HyperX Fury 3200Mhz. Observe the already installed DIMM and install the new one in the same position. To open the case press the square button at the back and top, close to the corner of the case and pull the glass panel a couple of inches and then slide up. Easy access!

You just remove the cover and install the RAM. Here is the upgrading and service guide see page 10: http://h10032.www1.hp.com/ctg/Manual/c06657367 Here's a nice tool - the motherboard viewer: http://h10032.www1.hp.com/ctg/Manual/c06592761

“Is there a special way to install ram on this”

Asked by Zach 5 years ago

Answer This Question

See all questions & answers

HP OMEN - 30L Gaming Desktop - AMD Ryzen 5-Series 3600 - 8GB Memory - NVIDIA GeForce GTX 1660 SUPER - 1TB HDD + 256GB SSD-Front_Standard

1-3 of 3 Answers

No special way, just pull the levels at the ends of the ram sticks to the open position. Remove the current ram stick and placed the new ones in. There will be a little resistance, you'll have to push until the levers click and lock in place. You'll hear a little click when they are locked in. Just restart the computer, it should recognize the ram. Essentially a plug and play.
Answered by Josue 5 years ago
Sorry, there was a problem. Please try again later.
Is as simple as installing RAM in any motherboard, making sure you position the DIMM module using the notch as the guide. Use the same brand, model and specs as the installed one: Kinsgton HyperX Fury 3200Mhz. Observe the already installed DIMM and install the new one in the same position. To open the case press the square button at the back and top, close to the corner of the case and pull the glass panel a couple of inches and then slide up. Easy access!
Answered by pcedpr 5 years ago
Sorry, there was a problem. Please try again later.
You just remove the cover and install the RAM. Here is the upgrading and service guide see page 10: http://h10032.www1.hp.com/ctg/Manual/c06657367 Here's a nice tool - the motherboard viewer: http://h10032.www1.hp.com/ctg/Manual/c06592761
Answered by HP Team 5 years ago
Sorry, there was a problem. Please try again later.