“I added a matching ram stick and my ram speed dropped down to 2400 is there a way to get 16 gb at 3200 because the one stick it came with was at 3200”

1-7 of 7 Answers

• I had to call HyperX support after buying and installing the Kingston HyperX fury RGB 3200 MHz 8GB RAM from Amazon. It works, but it will not run at the advertised speed of 3200 MHz and it will not run in dual channel mode. To set the new RAM at the higher frequency, XMP Profile 1 for this memory slot has to be enabled in the bios. You can enable this function in the BIOS on most motherboards, but this functionality is missing from the HP bios. In order to enable the higher operating speed and to run in dual channel memory mode, you will have to purchase and install the 8GB of RAM directly from HP. The cost is $122.64 plus tax and shipping.

  Answered by DrTechNerd 5 years ago

  • 

  Helpful (4)Unhelpful (0)

  Report

  Sorry, there was a problem. Please try again later.

• I downloaded Ryzen Master and was able to manually change the speed. Just looked up videos on youtube for the help.

  Answered by Darko 4 years ago

  Helpful (1)Unhelpful (0)

  Report

  Sorry, there was a problem. Please try again later.

• Hello, is there a way to update the XMP profiles on the HP BIOS? or what has been the resolution to this issue.

  Answered by Sergio44961 5 years ago

  • 

  Helpful (1)Unhelpful (0)

  Report

  Sorry, there was a problem. Please try again later.

• I ordered it directly from the hp parts store and it wont arrive till august first... Awesome!

  Answered by Jake 5 years ago

  Helpful (0)Unhelpful (0)

  Report

  Sorry, there was a problem. Please try again later.

• Where can i purchase this I looked for it on hps website but couldnt find it

  Answered by John 5 years ago

  Helpful (0)Unhelpful (0)

  Report

  Sorry, there was a problem. Please try again later.

• https://parts.hp.com/hpparts/Search_Results.aspx?mscssid=2E6E94C6FF9943B490B51FF67C6BB294&SearchIn=PartNumber&SearchPN=L89729-001

  Answered by DrTechNerd 5 years ago

  • 

  Helpful (0)Unhelpful (1)

  Report

  Sorry, there was a problem. Please try again later.

• Hi Nick, you might have to go into the BIOS of your computer and make sure the RAM stick you installed is set to run at 3200. Sometimes the RAM is not always set to run at max speed by default. There are lots of great videos on YouTube about how to do this, I would just search for ram speed bios on google, and you should see some helpful videos.

  Answered by HP Team 5 years ago

  • 

  Helpful (2)Unhelpful (9)

  Report

  Sorry, there was a problem. Please try again later.