1-4 of 4 Answers
Just wanted to bump this thread because it's a logical question.
Sorry, there was a problem. Please try again later.Yes at the top of the case. It has room for either 2 120mm fans or 2 140mm fans.
Sorry, there was a problem. Please try again later.Yes. There is room. 2 140mm fans took for on the top. Although there is only 2 cpu fan connectors on the top of the board. So it would be a a stretch to reach the bottom chassis fan input connectors. But there are 2 spots on the motherboard open for extra chassis fans. Not really another spot to put any after the top two. You could upgrade cpu cooler for a 240 or 280mm aio radiator. And then the normal back exhaust fan. I put i Thermaltake ring 12 120mm exhaust fan right above the ram modules just because. It is a radiator fan, so high static. But that doesn't seem to make a difference compared to a "case" fan as far as airflow. At least that's my understanding of this model. I have spoken with ibuypower about it and they said it would be fine for the larger top mounted radiator 240 or 280mm just make sure the hoses are in the correct configuration to not screw up the pump. YouTube is helpful for that. Hoses down. Keeping the air bubble in the radiator and not the cpu. Extending the life and efficiency of the cooler. But that's another $140 and I already paid so much for it. I almost regret not building a diy. It's impossible to find the right motherboard info to see if you can expand memory m. 2 and ram. Also a bios download backup would be nice if I'm going to be messing with it. Can't find it anywhere. Ibuypower support is good for what it is. But these pre-built pc's are not "meant" to be worked on like a diy pc would be according to the motherboard manufacturer and ibuypower support. Still a good pc. But yeah. Thats my thoughts on it after owning it for a month or so.
Sorry, there was a problem. Please try again later.I've been using this and I've found everything gets pretty hot, regardless of the watercooling and present fans. I actually came here to see if anyone asked this already, so thanks for the help, everyone.
Sorry, there was a problem. Please try again later.
