A:AnswerOn the speaker you can press the Volume/Standby/Source knob repeatedly to cycle through the available Modes (AUX, RCA and Bluetooth).
The remote control has dedicated input buttons: AUX, RCA and Bluetooth.
A:AnswerThis is a shelf system with RCA or Bluetooth input.
This is not a passive speaker, do not connect with speaker wires to a receiver.
David M. - Insignia Support
A:AnswerOne of the speakers you can call the "main speaker". It's where all the dials are and such. And the power coard that you plug in the wall comes out of it. You connect the other speaker to the "main speaker" via the red and black speaker wire that comes in the box as well. So basically, one speaker to another is connected by speaker wire. I hope this clears up what you were looking to answer! ;)
A:AnswerMake sure you have the preamp enabled on the turntable and select the correct input on the speaker remote. The speakers won't automatically switch. You have to use the remote to select the input . Hope that helps.
A:AnswerYes, they work as stereo pair with bluetooth or directly through the RCA input in the back of one of the speakers. They are true stereo self powered bookshelf speakers.
A:AnswerAbout 6 feet. If you need more space between the speakers, you can use any standard speaker wire cut to your preferred length. Avoid the thicker style wire as the terminals were designed to accept a medium gauge wire.
A:AnswerThe Insignia™ 25W (per speaker, 50W total) Bluetooth Bookshelf Speakers are designed to work as a pair and do not support connecting additional speakers directly to them. -Ed | Insignia Support | https://www.bestbuy.com/site/brands/best-buy-brands/pcmcat1596746025285.c?id=pcmcat1596746025285
A:AnswerIt might be possible using the line inputs of these speakers but there might be some compromises, like having to adjust the volume separately with the speaker's remote. I would not recommend using the bluetooth connection due to the audio time delay. You might do better looking into a surround sound receiver and a set of passive speakers to go with it.
A:AnswerYes, this is the same system I currently have them connected to and the speakers sound great. Just make sure you have the switch in the back set to LINE and not phono. On your remote select RCA (speakers will show a green light).
A:AnswerYes, if you look at the description on the best buy page it says it comes with the RCA and speaker wires. See attached photo which is also on the Best Buy page.
A:AnswerHi.
I appreciate your trust in that we will answer your question accurately. YES, these speakers have an RCA INPUT (Red and White) built-in. Just make sure you are on the correct source. We are always here to help you in case you have need any assistance with it and thanks for your interest in this product.
Charles V. - Insignia Support
https://www.insigniaproducts.com/contact-us
A:AnswerHi.
Thank you for leaving us this question trusting that we will answer you accurately. These are stereo speakers, as long as the content you are listening has channel separation into Left and Right, the speakers will output it accurately. We are always here to help you in case you have need any assistance with it and thanks for your interest in this product.
Charles V. - Insignia Support
https://www.insigniaproducts.com/contact-us
