Questions & Answers

Q: QuestionHow do I know which voltage is selected on the adapter?

• A:Answer The adapter has illuminated LEDs that display the selected voltage.

Q: QuestionHow long is the cord attached to this adapter?

• A:Answer This adapter has a 5 feet long cord.

Q: QuestionWhat is the maximum current output of this AC adapter?

• A:Answer This AC adapter has a maximum current output of 3 amperes.

Q: QuestionCan I use this adapter internationally?

• A:Answer Yes, you can use this adapter internationally as it supports 100-240V input at 50/60 Hz.

Q: QuestionWill this work with an Arris SB33 modem? It has positive polarity & requires 12v, 1.5amps. The plug adapter fits, but the box looks like it provides 3amps for that size. As long as I select the correct voltage, will the amperage adjust to 1.5 or stay at 3

Asked 7 months ago by Deegee.

• A:Answer Thank you for your inquiry! Yes, the Insignia™ - 3,000 mA 5’ Universal AC Adapter for High-Output Devices can work with your Arris SB33 modem, which requires 12V and 1.5A. The adapter provides up to 3A, but the device will only draw the amount of current it needs, which in this case is 1.5A. As long as you set the adapter to the correct voltage (12V), it will safely provide the necessary current without overloading your modem. The adapter's ability to supply up to 3A means it can handle devices with higher current requirements, but it will not force more current into your modem than it needs. If you have any other questions or need further assistance, feel free to ask! Keith | Insignia Support

  Answered 7 months ago by InsigniaCustomerSupport

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this work with a samsung G3 odyssey 27 inch monitor?

Asked 11 months ago by Anonymous.

• A:Answer The Insignia™ 3,000 mA 5’ Universal AC Adapter for High-Output Devices is designed to support a wide range of devices with various voltage and current requirements. It offers adjustable voltage settings from 3 to 24 volts and can provide up to 3,000 mA (3 A) of current. To determine if it will work with your Samsung G3 Odyssey 27-inch monitor, you need to check the monitor's power requirements. If the monitor's voltage and current specifications fall within the adapter's range (3-24V and up to 3A), then it should be compatible. However, it's important to ensure that the connector tip matches the power input of your monitor. If you have the specific power requirements for your monitor, I can help you verify compatibility more precisely. Let me know if you need further assistance!

  Answered 11 months ago by InsigniaCustomerSupport

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this adaptor work for a sound bar listed with input of 24V and 3.4A ?

Asked 3 years ago by Andrew.

• A:Answer I think it won't work for what you need. This power supply outputs at 2A when set to 24V. You need one that is at or near 3.4A.

  Answered 3 years ago by Kaycee

  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (3)

Q: QuestionWill this cord work with the Insignia TV 28" Class (27.5" Diag.) - LED - 720p - HDTV?

Asked 4 years ago by TV.

• A:Answer It depends on how many volts you need to power it up. Check the volts and amps required. My speaker need it 15 v and 2.5 amp or more.

  Answered 3 years ago by Canito63Verified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this work in place of this: Sony 1-492-734-11 AC Adapter ACDP-085E02 ACDP-085E03 KDL-48W600B 40W600B 48W580B for my tv?

Asked 3 weeks ago by EeveeLou.

Q: QuestionThe adapter I’m replacing is 8.5volt. Will this charger work?

Asked 1 month ago by Sally.

Q: QuestionWill this work for an alesis nanoverb? Its a 9v ac/ac that requires 850mA.

Asked 1 month ago by Tanner.

• A:Answer No

  Answered 1 month ago by ShahramZVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan I use this on a old Philips dual monitor 15.4w?

Asked 2 months ago by Dmc081.

Q: QuestionWILL THIS WORK WITH SHARP VIDEO CAMERA?

Asked 3 months ago by T.

Q: QuestionWhat are the sizes of the tips that are included?

Asked 3 months ago by Stve.

Q: QuestionWill this charger charg a ninbot scooter w/42 volt input

Asked 3 months ago by AuggieOne.

• A:Answer yes

  Answered 3 months ago by ArceliaHVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work with a Spectrum WiFi 6E Router? Input 100-120V Output 12.0V 3.0A round connector

Asked 3 months ago by DaBoyzCaneCorso.

Q: QuestionDoes this fit a SoundTouch portable

Asked 4 months ago by Anonymous.

• A:Answer Thank you for your inquiry! The Insignia™ 3,000 mA Universal AC Adapter might work with the Bose SoundTouch Portable if the power needs match usually 12V and 1.5A and one of the included tips fits the charging port. However, since Bose often uses special connectors, it’s not guaranteed to fit. It’s best to check your original charger’s label or contact Bose to be sure. Tine | Insignia Supports

  Answered 4 months ago by InsigniaCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work with Verizon cr1000a modem ?

Asked 4 months ago by RockyB.

• A:Answer Thank you for your inquiry! The Insignia™ 3,000 mA 5’ Universal AC Adapter is designed to power a wide range of high-output devices thanks to its adjustable voltage settings (from 3V to 12V), multiple interchangeable tips, and a maximum current output of 3 amps. However, it is not guaranteed to be compatible with the Verizon CR1000A modem. The modem likely requires a specific voltage, amperage, and connector type, which may not match the adapter’s available settings and tips. While the adapter might technically meet the power requirements if the voltage and polarity align and one of the included tips fits, using a third-party power supply for networking equipment can be risky. For best results and to avoid potential damage or connectivity issues, it’s recommended to use the original or manufacturer-approved power adapter for the CR1000A.

  Answered 4 months ago by InsigniaCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this can work with Fujitsu scansnap s1500 for power ?

Asked 5 months ago by SahibNagra.

• A:Answer Hi there! It will not work, the Insignia adapter provides only 2.0A at 24V, but the ScanSnap S1500 needs 2.65A. It's not a safe or sufficient match. |Angelica| Insignia Products|

  Answered 5 months ago by InsigniaCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question