A:AnswerThank you for your inquiry! The Insignia™ 3,000 mA 5’ Universal AC Adapter for High-Output Devices uses a positive tip polarity configuration. This means that the center pin (or tip) of the adapter’s connector carries the positive voltage, while the outer barrel is negative. This is a common polarity setup for many electronic devices, but it's always important to verify that your device also requires a positive tip to avoid any risk of damage. Using an adapter with the wrong polarity can potentially harm your device or prevent it from functioning properly.
A:AnswerMost definitely, at 24V it provides 2 amps which is roughly 2000ma. further more it provides power at these levels
3v at 3 amps
4.5v at 3 amps
5v at 3 amps
6v at 3 amps
7.5v at 3 amps
9v at 3 amps
12v at 3 amps
13.5v at 3 amps
15v at 3 amps
19.5v at 2 amps
24v at 2 amps
A:AnswerThank you for your inquiry! The Insignia™ 3,000 mA 5’ Universal AC Adapter for High-Output Devices is designed to work with a variety of devices that require up to 3,000 mA of current and have round-pin connectors. However, it is important to note that this adapter is not recommended for use with laptops.
HP Stream laptops typically require specific power adapters that match their voltage and amperage requirements. Using an adapter that is not specifically designed for your laptop could potentially cause damage or not provide the necessary power.
For your HP Stream laptop, I recommend using the original power adapter or a compatible replacement that meets the exact specifications of your laptop. Keith | Insignia Support
A:AnswerThere is a 24V point on the voltage selection wheel and I'm thinking that once you set the correct voltage, the device/air purifier would only pull the amount of mA it needs. But I'm not 100% so get a second opinion
A:AnswerMost likely not as this unit only has 15v at 3 amps, 19.5v at 2 amps and 24v at 2 amps so unless your device can handle a couple more volts running at 19.5 I wouldn't recommend it
A:AnswerThe Insignia™ 3,000 mA 5’ Universal AC Adapter (NS-AC3000) is designed to be compatible with a wide range of devices, as long as the voltage requirement is between 3 and 24 V DC and the device does not require more than 3,000 mA (3 A) of current. If your Gaems portable gaming monitor falls within these specifications, it should work well with this adapter. To ensure compatibility, you might want to check the voltage and current requirements of your Gaems monitor. If you need further assistance, feel free to ask! Jeth | Insignia Support. https://www.bestbuy.com/site/insignia-3000-ma-5-universal-ac-adapter-for-high-output-devices-black/6465025.p?skuId=6465025
A:AnswerThe Sennheiser HDR 165 charger requires a 9V DC, 300mA power supply. The Insignia™ NS-AC3000 adapter can provide various voltages, including 9V, but it supplies up to 3,000mA (3A). This means the current output of the Insignia adapter is much higher than what the Sennheiser charger requires. Using an adapter with a higher current rating is generally safe as long as the voltage matches, and the device can handle the extra current. However, it’s crucial to ensure the polarity matches and the adapter tip fits snugly. Jeth | Insignia Support. https://www.bestbuy.com/site/insignia-3000-ma-5-universal-ac-adapter-for-high-output-devices-black/6465025.p?skuId=6465025
A:AnswerThank you for your inquiry! The Insignia™ 3,000 mA (3A) Universal AC Adapter for High-Output Devices is not suitable for use with a Power Wheels 24V vehicle. The primary issue is a voltage mismatch, as the Power Wheels vehicle requires a 24-volt power source, while the Insignia adapter likely outputs a much lower voltage, often between 5V and 19V, which is insufficient for a 24V system. Additionally, even though the adapter provides 3A of current, the voltage mismatch is a critical factor. Power Wheels 24V vehicles typically require a charger that matches their voltage and amperage specifications exactly. Using an incorrect charger can damage the battery or the vehicle’s electrical system. Therefore, for charging a Power Wheels 24V vehicle, it is essential to use a charger specifically designed for 24V systems, providing the correct voltage and current as specified by the manufacturer. Keith | Insignia Support https://www.bestbuy.com/site/insignia-3000-ma-5-universal-ac-adapter-for-high-output-devices-black/6465025.p?skuId=6465025
A:AnswerBefore you plug it in select the voltage using the dial on the back then plug in. When plugged in the display on the front of the plug will light up the voltage that you selected showing that its on and powering your device
