“Please provide a video on example installation. What is this Ignition Kit for park mode and how much does it cost? Also, for Park Mode, can I use a battery pack with 2 USB 5V output instead of installing this Ignition kit?”
Answer This Question
1-1 of 1 Answer
Hi There! Please see the Installation guide below: INSTALLING THE FRONT DASH CAM Note: Use a 16 GB - 256 GB Class 10 or higher MicroSD card. A higher capacity card will allow for more captured clips. 1. Insert a microSD memory card label side facing windshield. 2. Clean and thoroughly dry the windshield area where you want to mount your dash cam. 3. Insert and slide the mounting bracket on the suction cup into the mounting slot on the top of your dash cam. 4. Peel the protective film from the mounting bracket, the dash cam lens and the LCD screen. 5. Position the suction cup on the windshield, then move the mounting bracket switch clockwise until you hear a click. INSTALLING THE REAR DASH CAM 1. Clean and thoroughly dry the windshield area where you want to mount your rear camera. 2. Connect the Mini USB cable to the Mini USB port on the front camera. 3. Connect the Mini USB cable to the rear camera. 4. Peel the protective film from the rear mounting bracket. 5. Position the bracket on the center and inside of the rear windshield, then firmly press the bracket to the windshield. 6. Position the rear camera so that it faces out of the ear window. 7. Organize and tuck away the cable to make sure that the cable doesn't obstruct the driver's view. Insignia Support Alvin www.insigniaproducts.com/support
Sorry, there was a problem. Please try again later.