Questions & Answers

Q: QuestionHow far from the wall does the Insignia Full-Motion TV Wall Mount sit when not extended?

• A:Answer The Insignia Full-Motion TV Wall Mount has a narrow 3.11" profile that fits close to the wall.

Q: QuestionHow far from the wall can this mount extend?

• A:Answer The TV mount can extend up to 22 inches from the wall.

Q: QuestionWhat is the maximum weight capacity of this TV mount?

• A:Answer This TV mount can hold up to 120 lbs.

Q: QuestionDoes this Insignia TV mount help with cable management?

• A:Answer Yes, it has a built-in cable management system to keep cords organized.

Q: QuestionCan I adjust the tilt of the TV with this mount?

• A:Answer Yes, you can adjust the tilt from +5 to -15 degrees without tools.

Q: QuestionDoes this TV mount come with the hardware needed for installation?

• A:Answer Yes, all the hardware you need to install the mount is included.

Q: Questioncan it be used as a corner mount?

Asked 9 months ago by Anonymous.

• A:Answer Yes, the Insignia™ Full-Motion TV Wall Mount for Most 42"–90" TVs can be used as a corner mount. This mount features two articulating arms that allow for a wide range of motion, including extending up to 22 inches from the wall and swiveling up to 90 degrees. These features make it suitable for corner installations, providing flexibility in positioning your TV for the best viewing angle. When installing in a corner, ensure that both walls can support the weight of the TV and mount. Follow the installation guide carefully to secure the mount properly. If you have any other questions or need further assistance, feel free to ask!

  Answered 9 months ago by InsigniaCustomerSupport

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionCan this mount move the tv laterally (from side to side while still facing forward, as opposed to rotating)? If so, by how much?

Asked 9 months ago by LSLA.

• A:Answer Thank you for your inquiry! The Insignia™ Full-Motion TV Wall Mount for Most 42"–90" TVs allows for lateral movement of up to 22 inches (56 cm) from side to side while still facing forward. This feature provides flexibility in positioning your TV for optimal viewing angles. If you have any other questions or need further assistance, feel free to ask! - Mae | Insignia Support

  Answered 9 months ago by InsigniaCustomerSupport

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionHow are the cables managed for when the tv is extended from the wall? What or how many cables can it carry? Are the cables enclosed or mounted on the arms externally? Thank you,

Asked 1 year ago by Marc.

• A:Answer Thank you for your questions about the Insignia™ Full-Motion TV Wall Mount! Our design incorporates a cable management system that allows you to neatly route cables while ensuring a clean look when the TV is extended from the wall. The cables are primarily contained within the arms of the mount to minimize any external clutter. Regarding capacity, the mount can typically handle standard HDMI, power, and other audiovisual cables. While there's no strict limit on the number of cables, we recommend keeping the total bundled cables manageable for optimal performance. If you have any further questions or need more details, feel free to reach out. We're here to help!

  Answered 1 year ago by InsigniaCustomerSupport

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this work with metal studs?

Asked 1 year ago by Anonymous.

• A:Answer The Insignia Full Motion Wall Mount is typically designed for a range of wall types, including both wood and metal studs. However, when mounting to metal studs, it's essential to use the appropriate hardware and techniques to ensure a secure installation.

  Answered 1 year ago by InsigniaCustomerSupport

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionHow do I adjust the tension on the entire bracket? It is too tight.

Asked 4 days ago by JanaB.

Q: Questioncan I use this tv mount also mount a sound bar

Asked 3 weeks ago by MMCD.

Q: QuestionCan this bracket be used to mount tv outdoors?

Asked 3 weeks ago by Outside.

Q: QuestionWill this fit on a wall with 24inch stud spread

Asked 1 month ago by Mounting.

• A:Answer No! This mount can only be used with studs 16”on center.

  Answered 2 weeks ago by Jesusfreak

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan this wall mount be mounted on a corner?

Asked 2 months ago by Sandy.

• A:Answer Maybe! This mount is designed to sit flat on a wall, however, if you place it on one side of a corner wall, you can use the extension and swivel features to pull the TV out and angle it so that it faces into the corner. I hope that makes sense- see the sketch below as well. Imagine you mount it like that then holding the TV rotate it so that the TV goes diagonally across the corner.

  Answered 1 month ago by MoonMusicVerified Purchase

  • 
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWould this work with a tv that has a 100X200 VESA pattern. I bought a hisense TV from BB and need to switch rooms - but it doesn't work on the full motion mount I have in the new room already so I need to find a new mount.

Asked 2 months ago by MeganAnne.

• A:Answer "supports VESA patterns from 200 × 100 up to 600 × 400, with all common sizes in between"

  Answered 1 month ago by MoonMusicVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this mount work with Samsung Frame 43"?

Asked 3 months ago by fifi.

Q: Questioni just purchased a Samsung s90d 65” oled tv. Will this bracket work with this tv. Also I am concerned about the length of the screw. How do I know what is the proper length for my tv.

Asked 4 months ago by Chato.

• A:Answer yes-"for Most 42"–90" TVs — Extends 22" ". Check the VESA compatibility: "and supports VESA patterns from 200 × 100 up to 600 × 400, with all common sizes in between"

  Answered 1 month ago by MoonMusicVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this mounting bracket accommodate 24' on center studs?

Asked 4 months ago by TVINSTALL.

• A:Answer Hi there! Yes, the Insignia™ Full-Motion TV Wall Mount for Most 42"–90" TVs (Model NS-TVLFMB) does accommodate 24" on-center studs. According to the installation guide, it includes a wall plate template and hardware that supports mounting on wood studs spaced either 16" or 24" apart, as well as on solid concrete or concrete block walls. Just make sure to use a stud finder and the correct drill bit size (7/32" for wood) during installation. |Angelica| Insignia Products|

  Answered 4 months ago by InsigniaCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question