1-2 of 2 Answers
Dear customer, thank you for your interest in Jackery products. The Explorer 300 Plus, with a battery capacity of 288Wh and an output power of 300W, is capable to power a CPAP machine. Typically, a CPAP machine consumes between 30 to 60 watts, and with heated humidifiers in higher-pressure settings, this can increase to 70–100 watts. Based on an average consumption of 45 watts per CPAP machine, the E300 Plus could theoretically run a CPAP machine for approximately 5.5 hours. Please note that this is a rough estimate, and the actual runtime will depend on the specific power draw of the CPAP machine and any additional loads. If you can provide specific power consumption figure for your CPAP machine, we can offer a more accurate calculation. Should you require further assistance or more detailed information, please do not hesitate to contact our customer service team (Customer Service: [email protected] / +1-888-502-2236 Weekdays 9AM to 5PM PST). Warm regards, Jackery Support Team
Sorry, there was a problem. Please try again later.Runs mind is fine. I have a variable, CPAP and it will last all night no problem. of course mine doesn’t draw constant power at highest rate but as long as it goes, doesn’t go over 30 W I’ll run for at least 8 hrs.
Sorry, there was a problem. Please try again later.