Questions & Answers

Q: QuestionDoes this system include a wireless subwoofer?

• A:Answer No, the Klipsch HT-50 home theater system does not include a wireless subwoofer.

Q: QuestionWhat is the maximum power this home theater system can handle?

• A:Answer The Klipsch HT-50 home theater system has a maximum power handling of 200 watts.

Q: QuestionWhat type of tweeter material is used in these speakers?

• A:Answer The Klipsch HT-50 home theater system uses Neodymium tweeters.

Q: QuestionWhat is the minimum frequency response of this home theater system?

• A:Answer The Klipsch HT-50 home theater system has a minimum frequency response of 23.0 hertz.

Q: QuestionWhat kind of connectors are needed with this system? Bare wire or bannana or ?

Asked 4 years ago by Dogman1955.

• A:Answer I used bare wire to make speaker connections. This was also the recommendation from user manual.

  Answered 4 years ago by LarryFromGaryVerified Purchase

  Helpful (6)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: Questionwhat do I need to use this on a desktop computer?

Asked 4 years ago by lu1zp1.

• A:Answer The HT-50 is a passive home theater system that will require a connection with a receiver/amplifier that supplies close to 75 Watts per channel at 8 Ohms. Connect your desktop computer to this receiver/amplifier to play audio through the speakers.

  Answered 4 years ago by Klipsch Product Expert

  
  Helpful (9)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes this system have enough bass for a one bedroom apartment?

Asked 4 years ago by LGC1.

• A:Answer No. You will need a separate sub woofer.

  Answered 4 years ago by Anonymous

  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: Questionhow far away can the satelite spks. be?

Asked 4 years ago by bjruss.

• A:Answer They are hardwired, so as long as you have enough wire, as far away as you want. They are not wireless.

  Answered 4 years ago by TRex67Verified Purchase

  Helpful (5)Unhelpful (1)ReportAnswer this questionShow more answers (1)

Q: QuestionCan the speaker bracks be removed on the ht50 HTSSS ? Thanks.

Asked 4 years ago by Anonymous.

• A:Answer Yes, but they are dual purpose for use as stands or wall mounting brackets.

  Answered 4 years ago by KlipschSupport

  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhat is the amount of watts on this?

Asked 3 years ago by Diva.

• A:Answer The HT-50 system should be connected to a receiver/amplifier that supplies close to 75 Watts per channel at 8 Ohms. This system has the following power handling: Satellite - 50 watts (200 watts peak) Center - 75 watts (300 watts peak)

  Answered 3 years ago by Klipsch Product Expert

  
  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: Questionhow are these different from the quintet 4 ? What is the actual difference in the update?

Asked 1 year ago by stevey.

• A:Answer There are a few very slight changes made between these models. Spec-wise and cosmetically, they are identical. The only change I could identify is a slight change in the design of the woofer.

  Answered 1 year ago by Klipsch Product Expert

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionIn some pictures, there is what appears to be a cloth grill covering the front of the speakers and in some the individual components are visible. Which is correct? Thanks

Asked 3 years ago by Rick.

• A:Answer It’s called a speaker grille and it’s pretty common to show you what the speakers look like underneath it when taking promotional pictures. They just pop off, but do absolutely come with them.

  Answered 3 years ago by diotharVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan you recommend a subwoofer to go with this system? Also, are there brackets that make it possible to mount the rear speakers on a wood beam in the back of my room. Last, can I operate this system using a Denon S540BT receiver?

Asked 3 years ago by Paul.

• A:Answer 1. I suggest looking at the R-101SW or the R-121SW! These can be found on the Klipsch site! 2. MOUNTING: Satellite: Base swivels for on-wall mounting via keyholes Center: Threaded insert 3. The Denon S540BT supplies 70 watts per channel into 8 ohms (20-20,000 Hz) at 0.08% THD, with 2 channels driven. This should be sufficient for the HT-50 home theater system.

  Answered 3 years ago by Klipsch Product Expert

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan these be mounted on the ceiling?

Asked 4 years ago by RDS.

• A:Answer While the HT-50 satellite speakers come with mounts designed to be mounted to the wall, the speakers can be mounted to the ceiling if proper mounting hardware is used. Klipsch does not supply or sell any ceiling mounts for the HT-50 model.

  Answered 4 years ago by Klipsch Product Expert

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionIf I already own a Klipsch Reference Series R-4B 2.1 Channel Sound Bar that is connected to my Samsung via optical, is there anyway to add speakers such as these to complement the system I already have?? I love my Klipsch and would like to upgrade

Asked 4 years ago by ACMNYFLG.

• A:Answer I am sorry to say, but the R-4B does not have compatible wireless surround speakers. You cannot add speakers to the R-4B system.

  Answered 4 years ago by Klipsch Product Expert

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes this set of speakers require an audio receiver to work?

Asked 4 years ago by zanydude.

• A:Answer Yes you need an amplifier which is found in an audio receiver or a/v receiver. Ideally you'd have a surround sound a/v receiver and a subwoofer for the best experience.

  Answered 4 years ago by LarryFromGaryVerified Purchase

  Helpful (2)Unhelpful (1)ReportAnswer this questionShow more answers (2)

Q: Questionsilly question, can they be used with a stereo system? with receiver of course. thanks.

Asked 1 year ago by pat.

• A:Answer The HT-50 system is a passive, non-powered speaker set. These speakers will need to be connected to a receiver/amplifier for power and audio reproduction.

  Answered 1 year ago by Klipsch Product Expert

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan these be used for replacement speakers for a Sony DVD/Home Theater System?

Asked 2 years ago by gvilla75.

• A:Answer Well this is basically surround sound speakers so I'll take care of the highs and mid-range for your system but if you want more bass and stuff like that you'll have to add a subwoofer or some tower speakers .

  Answered 2 years ago by KHPowerEngineeringVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this system completely wireless? If not what speaker set can I get that has no wires for the speakers? Looking for my father in law and want somewhat easy to setup and operate?

Asked 2 years ago by xXxJoEkRxXx.

• A:Answer The HT-50 is a passive, non-powered speaker set that will need to be connected to a receiver/amplifier via speaker wire. None of the included speakers are wireless. You may want to take a look at a powered speaker pair, such as the R-51PM or R-41PM.

  Answered 2 years ago by Klipsch Product Expert

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)