What is the size for the connector/angel valve? null

If you are talking about the t-connector used to divert water to the bidet, the top and bottom connections are standard 7/8" sizes used with toilets. The side connection going to the bidet is a standard 1/2" NPT thread that fits the hose supplied with the bidet. All sizes are standard US plumbing sizes.

I don't know but, the connectors included in the box fit 95% of the bathroom size connectors. Unless you have a very' old resident that hasn't been updated. [no offense.]

It is intended to be used with flexible hose and installed directly under the tank on the input pipe for the toilet fill valve. If your toilet is hard plumbed with 1/2" copper or flexible metal tubing, it would require replacing the tubing with a flexible hose with a stainless steel braided cover. On one of my toilets I used the following parts that I ordered from Amazon: Eastman 48088 Flexible Toilet Connector, Stainless Steel Braided Hose with Ballcock nuts, 7/8-inch B/C x 3/8-inch Compression Inlet, 12-Inch Length https://www.amazon.com/dp/B00068UUTM?ref=ppx_pop_mob_ap_share 10738LF 1/4-Turn Angle Stop Valve 3/8-inch x 5/8-inch, Chrome https://www.amazon.com/dp/B00GZ3F2LS?ref=ppx_pop_mob_ap_share Any similar parts should work for most installations.

the angle valve, I think mean? The 90 deg angle tee adapter it's 7/8 both ends one to the toilet water inlet other end to the existing water hose and the 90 deg tee goes to the hose supplied with the bidet https://www.youtube.com/watch?v=TAbHiNzKLrE

“What is the size for the connector/angel valve?”

This question is for: Luxe - Neo 185 Non-Electric Self-Cleaning Nozzle Universal Attachment Bidet - Blue

Asked by TruTran 5 years ago

Answer This Question

See all questions & answers

Luxe - Neo 185 Non-Electric Self-Cleaning Nozzle Universal Attachment Bidet - White-Front_Standard

1-4 of 4 Answers

If you are talking about the t-connector used to divert water to the bidet, the top and bottom connections are standard 7/8" sizes used with toilets. The side connection going to the bidet is a standard 1/2" NPT thread that fits the hose supplied with the bidet. All sizes are standard US plumbing sizes.
Answered by mike3928 5 years ago
Sorry, there was a problem. Please try again later.
I don't know but, the connectors included in the box fit 95% of the bathroom size connectors. Unless you have a very' old resident that hasn't been updated. [no offense.]
Answered by kristen 3 years ago
Sorry, there was a problem. Please try again later.
It is intended to be used with flexible hose and installed directly under the tank on the input pipe for the toilet fill valve. If your toilet is hard plumbed with 1/2" copper or flexible metal tubing, it would require replacing the tubing with a flexible hose with a stainless steel braided cover. On one of my toilets I used the following parts that I ordered from Amazon: Eastman 48088 Flexible Toilet Connector, Stainless Steel Braided Hose with Ballcock nuts, 7/8-inch B/C x 3/8-inch Compression Inlet, 12-Inch Length https://www.amazon.com/dp/B00068UUTM?ref=ppx_pop_mob_ap_share 10738LF 1/4-Turn Angle Stop Valve 3/8-inch x 5/8-inch, Chrome https://www.amazon.com/dp/B00GZ3F2LS?ref=ppx_pop_mob_ap_share Any similar parts should work for most installations.
Answered by Bard 5 years ago
Sorry, there was a problem. Please try again later.
the angle valve, I think mean? The 90 deg angle tee adapter it's 7/8 both ends one to the toilet water inlet other end to the existing water hose and the 90 deg tee goes to the hose supplied with the bidet https://www.youtube.com/watch?v=TAbHiNzKLrE
Answered by DavidST 5 years ago
Sorry, there was a problem. Please try again later.