Does this washer have a spin only cycle? null

Question

MattR · Accepted Answer

There is a Rinse&Spin cycle. The manual says if you want to Drain and Spin only, then select Rinse&Spin and turn off the Extra Rinse option.

Answer

This is the downfall of this machine. No spin cycle only.

Answer

This DOES NOT have a only spin cycle!!!! I would not recommend this washer!!! It takes me several hours to do one load of laundry. Because it adds more and more water. Never is fully spun out.

MaytagTeam · Answer

Tim, this model Washer does not have a spin only cycle.

Answer

Yes it does actually all you have to do it's turn on your washer and before selecting any cycle just go to spin speed settings on the right hand side and press Wich ever speed you wish then just press start and it will start spin only cycle.

Answered by Anonymous 2 years ago

Jenny · Answer

Actually you can have washer SPIN only. 
Choose "rinse & spin" then deselect the "extra rinse" button that lights up. 
It will SPIN ONLY!!

FrankM · Answer

No specific "Spin Only" mode, but as has been stated, selection the "Rinse & Spin" mode and deselected "Extra Rinse" on the right-hand menu will cause the washer to spin only.  I've done it a couple of times.

Note if the washer is unbalanced as it tries to spin, it may add a touch of water to try and balance the load out.  It occasionally does this in most wash options in the final spin.

Answer

I'm unable to use only the spin cycle. If anyone knows how to remove the rinse cycle and go straight to spin by using the "rinse and spin", please let me know.

Answer

No. I hate this washer. Just bring back the old Kenmore washing machines with knobs!

Answer

no

Answer

I have not found one, & I've had it a year.

Answer

Press the power button on the left side. On my washer Normal/Casual lights up.

Without choosing any wash option in the middle, press the spin button at the bottom of that column on the right side. As you you press the button, the different options will light up. Press until you get to the one you need.

On the bar above the central, large, silver knob, the light above "Spin" will blink. Press START and the spin cycle will start.

Answer

Yes and on, select "rinse spin" cycle, deselect "extra rinse", IF THE LOAD IS BALANCED IN THE TUB IT WILL SPIN ONLY. If its not balanced it will keep rinsing and spinning trying to balance the load.

Answer

No

NoobGod123 · Answer

Try holding down the power button a few seconds. It works on my Maytag 2000 Series. Worth a try.

Lori · Answer

Hit power Set control knob to rinse,drain & spin hit the 2nd rinse button twice the timer will say 12 mins hit start. It will then just spin only

“Does this washer have a spin only cycle?”

1-10 of 16 Answers