A:AnswerI believe that as long as it is connected to some positive and ground cables to turn it on and plugged in to the backup camera plug and wired to turn on when you go into reverse it should be fine without buying an extra monitor.
A:AnswerIt comes with the camera dime screws to mount the camera a bit to drill the hole if needed to. There’s also another piece in case you don’t want to mount it, you just switch the pieces off and on the camera. The wiring is in two parts. One part is the camera and the cables to power it on which are the black and red cables. The second part is the red cable and video cable that connect to the monitor then to connect the two parts you just have to connect the male and female and that’s it.