1-10 of 10 Answers
It is plug and play, all you need is as to power the switch.
Sorry, there was a problem. Please try again later.If your XBoxes do not need internet access then it will not require an uplink leg to function.
Sorry, there was a problem. Please try again later.Should be plug and play. If there are any problems with plug and play, try powering off the switch after all connections are made and then powering up again.
Sorry, there was a problem. Please try again later.No setup required. Just plug in your devices. One port (any port) must connect to your Internet router to get to the Wide Area Network (WAN).
Sorry, there was a problem. Please try again later.Model gs608 is plug and play. It does not provide dhcp but should be fine for a lan party
Sorry, there was a problem. Please try again later.It is plug and play, no online setup required.
Sorry, there was a problem. Please try again later.It’s plug n play, easy to install.
I would recommend:
Sorry, there was a problem. Please try again later.It is a network switch, so, you will need a modem, or, a router, unless you know how to network computers without a network controller. Not hard to do, but, you will need to know how to make things talk to each other.
Sorry, there was a problem. Please try again later.Dear Mac; It should be plug-n-play. Being online would be a nice option if you can do it, because the XBox experience is really about "online gaming." Other than that, you should have no issues setting this up. Best of luck.
Sorry, there was a problem. Please try again later.This switch will be to be connected to a router to able to connect the xboxes together, since the switch itself will not assign IP addresses to the xboxes, which is needed
Sorry, there was a problem. Please try again later.

