1-4 of 4 Answers
as long as you don't change the default settings on the on the sensitivity it will record the video but it only records front and if you have a rear camera otherwise as for the doors windows it will not but will record any sound
Sorry, there was a problem. Please try again later.Hello, The Series 2 Cameras have an internal lithium ion battery for emergency uses, such as the loss of power during an incident. This will allow the camera to continue recording to the end of the clip before switching off. If you intend on using Parking Mode on your camera, then we'd instead recommend using a Hard Wire Kit, not the Cigarette Lighter Cable. The Hard Wire Kit will allow the camera to draw nominal current from the car's battery, preventing the cam's battery from being drained. The Hard Wire Kit has an in-built voltage cut off which protects the car's battery from being drained below 11.2V. We'd recommend using a Permanent Live fuse. For Parking Mode, if the camera is completely still for five minutes (the car is parked), then the camera will 'hibernate' in Parking Mode. If your car is bumped and the G Force sensor registers movement then the dash cam will automatically turn on, record for 30 seconds and then shut back down again. If you are unlucky enough to be hit twice in a row then the dash cam would automatically record again and capture both events. You can adjust Parking mode by: 1) Turn the Dash Cam on 2) Stop it recording (by pressing the red circle) 3) Go into Settings (the button in the top left) 4) Go into Setup settings 5) Scroll across to ‘Parking Mode’ 6) Enable or disable Parking Mode here
Sorry, there was a problem. Please try again later.Yes! As i take my breaks in my car the moment i opened the door ot will record. You can adjust sensitivity
Sorry, there was a problem. Please try again later.Yes if there is enough impact sensed by the G sensor. This camera has a gyroscopic sensor that can be set to record upon impact.
Sorry, there was a problem. Please try again later.
