“On screen display How do I turn on the on screen display”
Answer This Question
1-8 of 8 Answers
If you mean the menu for the receiver. You hook up a composite video cable (the one's that have yellow plugs - although I have one that's longer and gold plated) from the Monitor out on the back of the receiver to any yellow video plug on your TV (it won't work any other way). press the 'Receiver' button on the remote. Press the little round Home button on the remote. Then the menu shows up white on black on the TV. You can use the Automatic MCACC calibration with the included mic plugged into the front of the receiver. Or adjust levels manually. Adjust the individual speaker decibel levels using the Chanel Select button on the remote with the readout on the Receiver's LED display.
Sorry, there was a problem. Please try again later.You have to 1) MAKE SURE TO HAVE A COMPOSITE CABLE FROM THE RECEIVER MONITOR OUT TO THE TV (yellow connection both ends) 2) make sure the TV is switched to composite video input. 3) Not have an HDMI Cable connected to the receiver. Basically OSD is for set up only. If your TV has no composite video input , then you are out of luck.
Sorry, there was a problem. Please try again later.There is a composite monitor out that needs to be plugged into a composite into the tv.
Sorry, there was a problem. Please try again later.Top left button on your remote control.
Sorry, there was a problem. Please try again later.You use your TV screen as the display here is how. Connect your 3D Blue Ray Player to one of the receivers HDMI in ports that states "DVD in" (NOTE: if it doesn't state "DVD in" then use any one of the four in ports) then connect an HDMI cable from the receivers HDMI out port to your 3D TV's HDMI in port. That's it and is why they call it a pass through because while the receiver improves the sound by playing the audio through the receivers connected speakers the video part just passes through the receiver to the 3D TV and this is the way you would connect with any DVD Blue Ray or regular.
Sorry, there was a problem. Please try again later.There is a button with a symbol on it that looks like a tv screen. Push it.
Sorry, there was a problem. Please try again later.You have to connect the video out from the receiver and connect it to a video input on your tv.
Sorry, there was a problem. Please try again later.You need to have component cables to get on screen display
Sorry, there was a problem. Please try again later.