A:AnswerYes the wall plate can be mounted to any flat surface you will need tapcon concrete anchors and a hammer drill to pre drill holes for the anchors I would take the wall plate to your local hardware store and explain to them what surface you need to mount the plate to and they should be able to sell you the supply's needed to complete the task you must have a drill that hammers a standard drill will not work for this application
A:AnswerWell, I placed one inch spacers between the wall and the frame.
This way I can reach. Flat screen tv manufacturers should place the
connectors to side(s).
A:AnswerI would think so. It comes with a wide assortment of bolts and spacers allowing most all the to be mounted. I had absolutely no problem with the two I installed; one for an LG 55" and one for a Samsung 47".
A:AnswerMy 55 " LG is curved , the lower back on my LG TV is flat..so the mount worked great...If you do not have a flat mounting area you could add spacers to correct the problem.
A:AnswerWe do provide multiple screw options but cannot foresee what types of screws are required for all TVs. If some of the provided screws fit the holes but just are not long enough, you can take them to any hardware store and they should be able to find that same diameter screw in a longer length for you.
A:AnswerI have the same wall mount. i mounted a sony bravia on it and needed to get 2 m6 and 2 m8 screws. got them at lowe's. try to find out which screws your tv uses or just get 4 m6 and 4 m8 screws, use the ones that fit nd return the ones that dont.
hope this helps you
A:AnswerNot sure the size. But all screws that are needed for mounting come with the wall mount. If I remember correctly There are 4 different different types of bolts that can fit any LCD TV. All 4 different types are in a set of 4. You also get the screws for wall installation. Everything you need is in the box. Including a diagram to assist with hanging the wall mount. Hope this helps...
A:AnswerThe installers did just that for our TV: drilled through stone to mount. We had to get a mason and an electrician to put an outlet in the stone and conceal the cables - the Geek Squad doesn't do all that. Let them know the situation before they come so that they will bring the right tools - and maybe assign the right person.
A:AnswerThe Rocketfish 32-70 inch tilting tv wall mount. I think it's $99. Not sure. Easy to install. Has different length screws to fit your tv. If your plate is not level after installing on wall, the brackets that attach to the bck of the tv can be adjusted just a torn of a screw on each side so your tv is level
