1-4 of 4 Answers
Your power supply cables should already have the power connector to attach. Notice the L notches on the drive connectors, that's how to tell its a SATA connector. You will also need a SATA data cable to connect to motherboard. The L connector is opposite the power connector. There are three speeds of SATA cable, but the latest ones on sell are SATA3 6Gbs.
Sorry, there was a problem. Please try again later.this is a SATA drive so that is the cable you need and an available SATA port on your mother board. The small format means you would need a little bracket to secure it in a 5.25 bay some computer cases have this already in place so you would want to look inside to decide where to mount the drive
Sorry, there was a problem. Please try again later.You will need a SATA power and data cable. If you had a drive there previously, the cables should be the same. Sounds like the only “issue” you will have is mounting it into a 5.25” drive bay.
Sorry, there was a problem. Please try again later.Sata power and data cable. Hopefully you will have a spare power connector, you would probably have to get a sata data cable to connect to the motherboard. And you will probably need a mounting bracket . Corsair CSSD-BRKT2 or something similar
Sorry, there was a problem. Please try again later.
