A:AnswerPull tabs down and unsnap from wall mount lower rail, lift TV up so the upper portion of the supports clear the wall mount upper rail and carry TV wherever you want.
A:AnswerI don't think this mount is recommended to be installed on drywall unless there are wood or metal studs behind the drywall for mounting bolts to attach.
A:AnswerThis mount is about 32" wide so most homes have multiple studs in that length. Some who could not locate studs exactly where they needed them used two 2 x 4's that mounted to studs and then mounted the wall mount to the 2 x 4's.
A:AnswerNo, not without remounting supports to the TV in different holes which requires removing TV from wall mount and adjusting the supports and rehanging the TV.
A:AnswerThis mount pulls a little away from the wall so you can reach behind the TV to hook up whatever cables you may have.
It pulls out from the wall, tilts up, tilts down, and slightly swivels left and right.
A:AnswerI don't have a Phillips TV but within brands the type screws will vary. You also must consider length. Don't select a screw that is too long. My TV used M6's and two different lengths were required.
