A:AnswerHi Queenbee808,
This model number is for a 65" TV. If you have a 65" this stand will not be compatible as the TV will be too large to fit properly. If you have the 55" it should be compatible. If you have any other questions give our customer support team a shout at [email protected].
Thanks!
- Haydn @ SANUS
A:AnswerHi there,
It should work. The height of the stand is 29". The width of the stand is 27". I hope this helps. If you have any additional questions give our Sanus pros a shout at [email protected].
Thanks!
- Haydn @ SANUS
A:AnswerHi there,
This stand should be compatible with your specific TV. The stand can hold TVs up to 60 lbs and supports VESA patterns from 100x100 mm all the way to 600x400 mm. Your TV looks to be under the weight limit and has a compatible VESA patters so it should work just fine!
Thanks,
- Haydn @ SANUS
A:AnswerHi Layla,
Thanks for the question. This stand has 8" of height adjustment up or down. So you'd have about 8" to work with when adjusting at the lowest point. When the stand is at the lowest point from the bottom of the stand to the top bracket would be about 20". I hope that helps.
Thanks,
- Haydn @ SANUS
A:AnswerMy 55 inch Sony is on a rectangular cabinet set out from the wall. It is perfectly stable set an inch from the front edge of the cabinet with its base hanging over the back an inch. The Sanus base needs a full 26.5 inches from one side of the cabinet to the other; it is 16.5 inches from front to back.
A:Answeri would say, "yes" depending upon the curve of your prospective tv. This is a heavy duty base. It fastens to the tv with two bars, each approx. 25 inches long and spaced about 12 inches apart. Each bar has 6 possible places to fasten the stand to the t.v. My Sony is 55 inches, On the back, the bottom base bar hangs over open space because of a depression in the design.
