How do you replace the brushes on the roller? null

Changing the brush and rollers are easy. Press the easy to find release and they just pop out. You can clean and replace very easy. No belts to mess with. I haven’t had to replace my rollers yet, but it’s the same process. Press the button to release. Snap back in and go!

You would probably have to replace the entire roller. Accessories are available on the Shark web site.

Both brushes are user replaceable - there a buttons on the powered floor unit that you depress and the brush and foam rollers will release, respectively from their retaining pins and you can either wash or replace them individually.

Hello, Here are the instructions on accessing the The Brushroll On The Rocket Duo Vacuum: 1) Use a coin to unlock the three locks on the bottom of the floor nozzle. 2) A portion of the base is removable to allow for better access to the brushroll and exposure to the airway. Shine a flashlight from the bottom to check for possible blockages in the airway. 3) Remove any string, carpet fibers, or hair that may be wrapped around the brushroll. There is a groove along the brushroll that allows a pair of scissors to cut across it to loosen up debris. 4) To re-assemble, replace base by lining it up along the front of the nozzle. Push down to snap into place until you hear a click. Lock the three lock. Best Regards Customer Support Team

“How do you replace the brushes on the roller?”

Asked by Anonymous 8 years ago

Answer This Question

See all questions & answers

Shark - Rocket DuoClean HV381 Bagless Upright Vacuum - Plasma blue-Angle_Standard

1-4 of 4 Answers

Changing the brush and rollers are easy. Press the easy to find release and they just pop out. You can clean and replace very easy. No belts to mess with. I haven’t had to replace my rollers yet, but it’s the same process. Press the button to release. Snap back in and go!
Answered by NoWorkDay 8 years ago
Sorry, there was a problem. Please try again later.
You would probably have to replace the entire roller. Accessories are available on the Shark web site.
Answered by Stacy 7 years ago
Sorry, there was a problem. Please try again later.
Both brushes are user replaceable - there a buttons on the powered floor unit that you depress and the brush and foam rollers will release, respectively from their retaining pins and you can either wash or replace them individually.
Answered by vnv01 8 years ago
Sorry, there was a problem. Please try again later.
Hello, Here are the instructions on accessing the The Brushroll On The Rocket Duo Vacuum: 1) Use a coin to unlock the three locks on the bottom of the floor nozzle. 2) A portion of the base is removable to allow for better access to the brushroll and exposure to the airway. Shine a flashlight from the bottom to check for possible blockages in the airway. 3) Remove any string, carpet fibers, or hair that may be wrapped around the brushroll. There is a groove along the brushroll that allows a pair of scissors to cut across it to loosen up debris. 4) To re-assemble, replace base by lining it up along the front of the nozzle. Push down to snap into place until you hear a click. Lock the three lock. Best Regards Customer Support Team
Answered by Shark Support Team 8 years ago
Sorry, there was a problem. Please try again later.