A:AnswerYou will probably need to cut the speaker wire and splice a Y to your indoor and then to outdoor speakers. Keep track of what wires are what so they do not reverse. Since these are just speakers you could do the twist-together-and-tape-splice but you would be better off with either butt crimp connectors or better yet a shrink connector. What would be better would be to get an A/B speaker switch (probably somewhere like Radio Shack) so you can switch from indoor to outdoor. You could also probably find a switch that had A/B or Both but not sure if this system would power all the speakers effectively.
A:AnswerYes. There is a setting for that. You can also program order of play for up to 32 songs. I haven't done either but there are easy instructions.
A:AnswerMine would shut off after 10 mins. I pressed the sleep timer til it said "OFF" then I turned it off. Now, when I turn it off, it says "goodbye, checking, then goodbye, then it shuts off. I hope this works for you. :)
A:AnswerThank you for your recent inquiry regarding the Sharp CDDH950P Audio System. Here are the dimensions for this Sharp Audio System.
Width: 10 - 1/4" (260 mm)
Height: 13 - 1/2" (343 mm)
Depth: 13 - 1/5" (335 mm)
A:AnswerYou may have accidentally programmed something in there anyway. I recommend a factory reset (page 14 in the instructions), that will clear everything you ever programmed into it and start over. That way you know for sure if it is a malfunction. I never programmed any timers and have no issues with shut off. Good luck.
A:AnswerSharp uses a special plug to attach the speakers to the unit. If you are willing to cut off the speaker wires from the original speakers and splice in your own speakers, it should work. Before you do that, make sure that your speakers are at least 6 ohm impedance and are able to handle the output power of 120 Watts per channel.
A:AnswerThank you for your interest in the CDDH950P Sharp stereo system. The speakers are approximately 3 feet- 10.5 inches. The speaker wires cannot be made longer.
A:AnswerGreat question! The CD-DH950P Sharp stereo was not designed be connected to an additional speakers. It was only designed to work with the supplied speakers.
A:AnswerHello, thank you for your recent inquiry about the Sharp CDDH950P! For troubleshooting assistance, please reach out to our support center at 877-698-8475.
A:AnswerThe instructions with the stereo has exact instructions on how to load the CDs. Just follow them and you won't have any problems loading the trays.
A:AnswerWe are very sorry to hear about the power issue you are experiencing with your CDDH950P. If you can please email your contact information, the best time to reach you, and a brief description of your issue to [email protected] we would be happy to assist you further.
A:AnswerHello. This unit does have Random and Shuffle play for all 5 disc trays. If we can be of any further assistance, please reach out to us at [email protected]. We're happy to help!
